The European Commission funded the RISK-UE project in 1999 with the aim of providing an advanced approach to earthquake risk scenarios for European towns and regions. In the framework of Risk-UE project, two methods were proposed, originally derived and calibrated by the authors, for the vulnerability assessment of current buildings and for the evaluation of earthquake risk scenarios: a macroseismic model, to be used with macroseismic intensity hazard maps, and a mechanical based model, to be applied when the hazard is provided in terms of peak ground accelerations and spectral values. The vulnerability of the buildings is defined by vulnerability curves, within the macroseismic method, and in terms of capacity curves, within the mechanical method. In this paper, the development of both vulnerability and capacity curves is presented with reference to an assumed typological classification system; moreover, their cross-validation is presented. The parameters of the two methods and the steps for their operative implementation are provided in the paper.
The macroelement technique for modelling the nonlinear response of masonry panels is particularly efficient and suitable for the analysis of the seismic behaviour of complex walls and buildings. The paper presents a macroelement model specifically developed for simulating the cyclic in-plane response of masonry walls, with possible applications in nonlinear static and dynamic analysis of masonry structures. The model, starting from a previously developed macroelement model, has been refined in the representation of flexural-rocking and shear damage modes, and it is capable of fairly simulating the experimental response of cyclic tests performed on masonry piers. By means of two internal degrees of freedom, the two-node macroelement permits to represent the coupling of axial and flexural response as well as the interaction of shear and flexural damage.
Seismic risk evaluation of built-up areas involves analysis of the level of earthquake hazard of the region, building vulnerability and exposure. Within this approach that defines seismic risk, building vulnerability assessment assumes great importance, not only because of the obvious physical consequences in the eventual occurrence of a seismic event, but also because it is the one of the few potential aspects in which engineering research can intervene. In fact, rigorous vulnerability assessment of existing buildings and the implementation of appropriate retrofitting solutions can help to reduce the levels of physical damage, loss of life and the economic impact of future seismic events. Vulnerability studies of urban centres should be developed with the aim of identifying building fragilities and reducing seismic risk. As part of the rehabilitation of the historic city centre of Coimbra, a complete identification and inspection survey of old masonry buildings has been carried out. The main purpose of this research is to discuss vulnerability assessment methodologies, particularly those of the first level, through the proposal and development of a method previously used to determine the level of vulnerability, in the assessment of physical damage and its relationship with seismic intensity. Also presented and discussed are the strategy and
Ancientmonumentalmasonry buildings are complex structures that were not based\ud on an engineered design, underwent many transformations during their life and often present lack of connections among the structural elements. Earthquakes are themain cause of damage for ancient masonry structures and, in order to reduce their vulnerability with compatible and light interventions, it is necessary to have accurate models for the seismic analysis, able to simulate the nonlinear behavior of masonry, and a well defined performance-based assessment procedure, aimed to guarantee the acceptable level of risk for the occupants and for the conservation of the monument itself. The paper outlines the guidelines that were developed within the PERPETUATE European research project. The wide variety of architectural assets is classified and the related proper modeling strategies are identified; moreover, immovable artistic assets are considered in the assessment. A displacement-based approach is adopted,\ud because these structures crack even for low intensity earthquakes and can survive severe ones only if they have a sufficient displacement capacity. Safety and conservation requirements are proposed by considering distinct sets of performance levels, related to use and safety of people, conservation of the building and of the artistic assets that might be present. Some indications on the seismic hazard assessment are provided, considering the distinctive features of some types of ancient structures. Within the fundamental knowledge phase, sensitivity analysis is proposed in order to address and optimize the in-situ investigation and to define proper confidence factors, aimed to consider epistemic and statistical uncertainties. Different\ud modeling approaches and methods of analysis are considered, depending on the characteristics of the structure; both static pushover and incremental dynamic nonlinear analyses are considered. Related verification procedures are defined to evaluate the seismic intensity measure, and the corresponding return period, which is compatible with each performance level that must be fulfilled
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations鈥揷itations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright 漏 2024 scite LLC. All rights reserved.
Made with 馃挋 for researchers
Part of the Research Solutions Family.