ResumenTradicionalmente, se utiliza el ensayo de vigas prismáticas sometidas a flexión para caracterizar la resistencia y el comportamiento en el régimen post fisuración del hormigón reforzado con fibras (HRF). Sin embargo, estos ensayos presentan una alta dispersión en sus resultados cuestionando su empleo para el control sistemático del HRF en obras; tienen, además el inconveniente de tratarse de ensayos complejos que requieren de probetas pesadas y de personal de laboratorio altamente calificado. Alternativamente, se ha propuesto el uso de otros ensayos normalizados de tracción directa e indirecta para realizar la caracterización de propiedades de los HRF, pero éstos han resultado ser muy complejos de ejecutar, sin obtener grandes mejoras en relación a la alta dispersión de los resultados. Con la finalidad de solucionar esta serie de inconvenientes, se ha propuesto el uso de un ensayo de tracción indirecta basado en una configuración del ensayo de doble punzonamiento, al que se ha denominado "Ensayo Barcelona". Este ensayo requiere de probetas de pequeñas dimensiones, con una alta superficie específica de fractura, permitiendo obtener valores representativos de la resistencia y de la tenacidad del material, con un coeficiente de variación de los resultados inferior al 13%, valor que es considerablemente menor a los alcanzados con otras metodologías experimentales. En este artículo se presentan los resultados de diferentes campañas experimentales, que permiten validar el uso del ensayo Barcelona como una metodología experimental adecuada para la sistemática caracterización del HRF en obras.Palabras Clave: Hormigón reforzado con fibras, tenacidad de HRF, ensayo Barcelona, ensayo de doble punzonamiento, control de HRF Abstract Traditionally, flexural testing of prismatic beams is used to characterize the strength and behavior in post -cracking regime of fiber -reinforced concretes (FRC). These tests exhibit a high dispersion in their results, and therefore invalidate the use of such tests for the systematic control of FRCs works. Also, they have the disadvantage of being complex tests, which require heavy specimens and highly qualified staff . The use of other standard tests of direct and indirect tensile strength has also been intended, which have proved very complex to implement and also have high dispersion. Aiming to solve this set of problems, an indirect tensile test based on the configuration of double punching test, called the Barcelona test, has been proposed to control tensile behavior of FRC. This test requires smaller specimens, with a high specific surface of fracture, allowing to obtain values representative of strength and toughness of materials, with considerably less dispersion than other experimental methodologies. This paper presents the results of different experimental campaigns, which validate the use of Barcelona test as a suitable methodology to systematic characterization FRC in works.Keywords: Fiber reinforced concrete, Toughness of FRC, Barcelona test, Double -punching test, FRC contro...
RESUMENActualmente, los shotcretes reforzado con fibras (FRS) que se utilizan en la construcción de sostenimientos de túneles de faenas mineras en Chile, se especifican y controlan a través de su capacidad de absorción de energía, la que se determina mediante el ensayo de panel cuadrado, siguiendo la recomendación EFNARC. Sin embargo, esta prueba no permite controlar la calidad del hormigón proyectado directamente sobre la roca, así como tampoco la verificación de puntos dudosos o no controlados. Debido a esto, se ha propuesto controlar los FRS mediante el ensayo Barcelona (BCN), que es un ensayo de tracción indirecta que se puede ejecutar utilizando testigos cortados directamente desde el soporte endurecido de túnel. Para aplicar progresivamente el ensayo BCN en reemplazo del ensayo de paneles, a partir de resultados experimentales se ha obtenido a relación tipo código que permite obtener la capacidad de absorción de energía del FRS a partir de ensayos de cilindros sometidos a doble punzonamiento. La expresión obtenida, fue validada con una segunda campaña experimental obteniendo resultados ampliamente satisfactorios.PALABRAS CLAVE: capacidad de absorción de energía, hormigón reforzado con fibras, ensayo de panel cuadrado, ensayo Barcelona 1.-INTRODUCCIÓN En Chile, en los últimos años, los hormigones proyectados o shotcrete reforzados con fibras (SRF) están siendo ampliamente utilizados para el revestimiento de túneles, especialmente en proyectos hidroeléctricos y faenas mineras, como se puede ver en la Fig. 1. En esos proyectos, los diseños de los sostenimientos se basan principalmente en el método QBarton modificado [1], [2], el que relaciona la calidad del macizo rocoso con la capacidad de absorción de energía mínima del FRS, la que se determina mediante el ensayo de paneles cuadrados muestreados durante la proyección, siguiendo las recomendaciones dadas en "European Specification for Sprayed Concrete" publicado por EFNARC [3]. 341
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.