Alcohols (bioalcohols) is a class of chemicals that are used as a feedstock for the manufacturing of a large number of valuable intermediates in industrially important processes. Currently, sustainable technologies for selective conversion of alcohols utilize “green” oxidants, mainly, ambient air or oxygen. Due to the high affinity of oxygen towards silver, the latter serves as an active component of supported heterogeneous catalysts. In this review, we consider Ag-based catalysts that participate in gas- or liquid-phase oxidation of alcohols. Oxidation of methanol, ethanol, ethylene glycol, propylene glycol, glycerol, benzyl and allyl alcohols is mostly considered. A particular attention is paid to selective photooxidation of alcohols over Ag-based catalysts. We discuss the catalyst composition in terms of (1) the state of the active component, (2) the nature of the substrate, (3) support nature, and (4) the strength of the metal–support interactions.
Different methods (the wetness impregnation of Ag and Pd precursors dissolved in water or acetonitrile solution, and the double solvent impregnation technique) were employed to immobilize Ag–Pd nanoparticles (NPs) into the pores of the microporous zirconium-based metal-organic framework known as UiO-66. The obtained materials were characterized by using nitrogen adsorption-desorption at −196 °C, powder X-ray diffraction, UV-Vis diffusion reflectance spectroscopy, and transition electron microscopy measurements. Special attention was paid to the acid and redox properties of the obtained materials, which were studied by using temperature-programmed desorption of ammonia (TPD-NH3) and temperature-programmed reduction (TPR-H2) methods. The use of a drying procedure prior to reduction was found to result in metallic NPs which, most likely, formed on the external surface and were larger than corresponding voids of the metal-organic framework. The formation of Ag–Pd alloy or monometallic Ag and Pd depended on the nature of both metal precursors and the impregnation solvent used. Catalytic activity of the AgPd/UiO-66 materials in propylene glycol oxidation was found to be a result of synergistic interaction between the components in AgPd alloyed NPs immobilized in the pore space and on the external surface of UiO-66. The key factor for consistent transformation of propylene glycol into lactic acid was the proximity between redox and acid-base species.
Silver/palladium composite nanoparticles (NPs) obtained by pulsed laser ablation in liquid (PLAL) technique catalyze oxidation of propylene glycol (PG) to lactic acid (LA) in alkaline media. The PLAL technique allows obtaining silver/palladium NPs with different silver/palladium molar ratio. Addition of palladium increases PG conversion (up to 52%) and LA selectivity (up to 88%). The reaction temperature and silver/palladium molar ratio strongly affects the catalytic activity of the silver/palladium composite NPs.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.