No abstract

The simulation of the energy consumptions in an hourly regime is necessary in order to perform calculations on residential buildings of particular relevance for volume or for architectural features. In such cases, the simplified methodology provided by the regulations may be inadequate, and the use of software like EnergyPlus is needed. To obtain reliable results, usually, significant time is spent on the meticulous insertion of the geometrical inputs of the building, together with the properties of the envelope materials and systems. Less attention is paid to the climate database. The databases available on the EnergyPlus website refer to airports located in rural areas near major cities. If the building to be simulated is located in a metropolitan area, it may be affected by the local heat island, and the database used as input to the software should take this phenomenon into account. To this end, it is useful to use a meteorological model such as the Weather Research and Forecasting (WRF) model to construct an appropriate input climate file. A case study based on a building located in the city center of Rome (Italy) shows that, if the climatic forcing linked to the heat island is not considered, the estimated consumption due to the cooling is underestimated by 35–50%. In particular, the analysis and the seasonal comparison between the energy needs of the building simulated by EnergyPlus, with the climatic inputs related to two airports in the rural area of Rome and with the inputs provided by the WRF model related to the center of Rome, show discrepancies of about (i) WRF vs. Fiumicino (FCO): Δ = −3.48% for heating, Δ = 49.25% for cooling; (ii) WRF vs. Ciampino (CIA): Δ = −7.38% for heating, Δ = +35.52% for cooling.

No abstract

No abstract

No abstract

Building energy need simulations are usually performed using input files that contain information about the averaged weather data based on historical patterns. Therefore, the simulations performed are not able to provide information about possible future scenarios due to climate change. In this work, future trends of building energy demands due to the climate change across Europe were studied by comparing three time steps (present, 2050, and -2080) in three different European cities, characterized by different Köppen-Geiger climatic classes. A residential building with modern architectural features was taken into consideration for the simulations. Future climate conditions were reached by applying the effects of climate changes to current hourly meteorological data though the climate change tool world weather file generator (CCWorldWeatherGen) tool, according to the guidelines established by the Intergovernmental Panel on Climate Change. In order to examine the resilience of the building, the simulations carried out were compared with respect to: peak power, median values of the power, and energy consumed by heating and cooling system. The observed trend shows a general reduction in the energy needs for heating (–46% for Aberdeen, –80% for Palermo, –36% for Prague in 2080 compared to the present) and increase (occurrence for Aberdeen) in cooling requirements. These results imply a revaluation of system size.

Ecoregionalization is the process by which a territory is classified in similar areas according to specific environmental and climatic factors. The climate and the environment strongly influence the presence and distribution of vectors responsible for significant human and animal diseases worldwide. In this paper, we developed a map of the eco-climatic regions of Italy adopting a data-driven spatial clustering approach using recent and detailed spatial data on climatic and environmental factors. We selected seven variables, relevant for a broad set of human and animal vector-borne diseases (VBDs): standard deviation of altitude, mean daytime land surface temperature, mean amplitude and peak timing of the annual cycle of land surface temperature, mean and amplitude of the annual cycle of greenness value, and daily mean amount of rainfall. Principal Component Analysis followed by multivariate geographic clustering using the k-medoids technique were used to group the pixels with similar characteristics into different ecoregions, and at different spatial resolutions (250 m, 1 km and 2 km). We showed that the spatial structure of ecoregions is generally maintained at different spatial resolutions and we compared the resulting ecoregion maps with two datasets related to Bluetongue vectors and West Nile Disease (WND) outbreaks in Italy. The known characteristics of Culicoides imicola habitat were well captured by 2/22 specific ecoregions (at 250 m resolution). Culicoides obsoletus/scoticus occupy all sampled ecoregions, according to its known widespread distribution across the peninsula. WND outbreak locations strongly cluster in 4/22 ecoregions, dominated by human influenced landscape, with intense cultivations and complex irrigation network. This approach could be a supportive tool in case of VBDs, defining pixel-based areas that are conducive environment for VBD spread, indicating where surveillance and prevention measures could be prioritized in Italy. Also, ecoregions suitable to specific VBDs vectors could inform entomological surveillance strategies.

Large-eddy simulations of an idealized diurnal urban heat island are performed using the Weather Research and Forecasting Model. The surface energy balance over an inhomogeneous terrain is solved considering the anthropogenic heat contribution and the differences of thermal and mechanical properties between urban and rural surfaces. Several cases are simulated together with a reference case, considering different values of the control parameters: albedo, thermal inertia, roughness length, anthropogenic heat emission, and geostrophic wind intensity. Spatial distributions of second-moment statistics, including the turbulent kinetic energy (TKE) budget, are analyzed to characterize the structure of the planetary boundary layer (PBL). The effect of each control parameter value on the turbulent properties of the PBL is investigated with respect to the reference case. For all of the analyzed cases, the primary source of TKE is the buoyancy in the lower half of the PBL, the shear in the upper half, and the turbulent transport term at the top. The vertical advection of TKE is significant in the upper half of the PBL. The control parameters significantly influence the shape of the profiles of the transport and shear terms in the TKE budget. Bulk properties of the PBL via proper scaling are compared with literature data. A log-linear relationship between the aspect ratio of the heat island and the Froude number is confirmed. For the first time, the effect of relevant surface control parameters and the geostrophic wind intensity on the bulk and turbulent properties of the PBL is systematically investigated at high resolution.