Some machines, such as heavy presses and rammers, can be exposed to big shock and inertial forces under dynamic severe working conditions. Even if vibration isolation to the foundations of machines operating under dynamic loads is applied, the exposure of these machines to shock and resonance loads may not be adequately prevented. The sensitivity of these machines, the product quality, or life span can also incredibly decrease. Therefore, it is essential to know the vibration behaviors of machine bodies and parts. This study investigates vibration characteristics of polymer matrix composite (PMC) materials by the experimental modal test method. Nine different composite beam samples having sizes of 20 × 25 × 480 mm were produced for modal tests. Composite beams contain different ratios of aggregate and epoxy resin. Each composite beam’s natural frequencies and damping ratios were defined with frequency response and coherence functions taken from the experimental modal tests. The results from the modal analysis revealed that the most influential parameter on the vibration properties was the gravel ratio. As a result of the experimental study, it was concluded that while epoxy-resin, gravel and fine-sand additives increased the stiffness of PMC beam, gravel and fine sand additives also increased the damping rate of PMC beam.
Testere çeşitli endüstrilerde, özellikle ikincil işlemler için hammaddeyi kesmesi gereken çelik tedarikçilerinde önemli bir birincil işlemdir. Şerit testere ve demir testeresine göre daha yüksek özelliklere göre üretilen, çevresine yerleştirilmiş çok sayıda kesme dişlerine sahip dairesel bir testere plakasından (daire testere gövdesi) oluşan dairesel testere bıçakları yüksek derecede boyutsal doğruluk gerektiren endüstriyel kesme işlemleri için kullanılmaktadır. Talaşlı imalatta harcanan gücün neredeyse tamamı ısıya dönüşmektedir. Kesme işleminde testere bıçağı, sürtünmeden kaynaklanan ısı ile ısınır. Kesme sırasında oluşan sıcaklıkların ölçülmesi oldukça zahmetli bir iştir, termal kameralar bu zahmetli iş için en gelişmiş araçlar olarak öne çıkmaktadırlar; ancak bu gelişmiş teknolojilerin kesme tezgâhları ile bütünleşmesi için hala araştırmaya ihtiyaç vardır. Bu çalışmada kesme parametrelerinin talaş sıcaklığı açısından optimizasyonu amaçlanmıştır. Çalışmada iki seviyeli dört farklı parametre seçilmiştir. Çalışma parçası olarak endüstride yaygın olarak kullanılan AISI 1040 tercih edilmiştir. Kesme deneyleri Taguchi metoduyla tasarlanmıştır. Yapılan deneyler sonunda kesim sıcaklığı talaşlar üzerinden alınan sıcaklıklar ile incelenmiştir. Sermet bıçak ile yapılan kesimlerde daha yüksek hızlara çıkması sebebiyle daha yüksek kesim sıcaklıklarına ulaşılmıştır.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.