Polarized small-angle neutron scattering (PSANS) experimental results obtained on arrays of ferromagnetic Co nanowires (φ ≈ 13 nm) embedded in self-organized alumina (Al2O3) porous matrices are reported. The triangular array of aligned nanowires is investigated as a function of the external magnetic field with a view to determine experimentally the real space magnetization M ( r) distribution inside the material during the magnetic hysteresis cycle. The observation of field-dependentSANSintensities allows us to characterize the influence of magnetostatic fields. The PSANS experimental data are compared to magnetostatic simulations. These results evidence that PSANS is a technique able to address real-space magnetization distributions in nanostructured magnetic systems. We show that beyond structural information (shape of the objects, two-dimensional organization) already accessible with nonpolarized SANS, using polarized neutrons as the incident beam provides information on the magnetic form factor and stray fields μ0Hd distribution in between nanowires.

The microstructure and texture of an Al1050/AZ31/Al1050 laminated composite fabricated by accumulative roll bonding at 400°C up to 5 cycles are investigated using Electron BackScatter Diffraction, neutron diffraction, microhardness measurements and tensile tests. EBSD analysis has shown that ARB processing led to microstructural refinement with equiaxed grain microstructure in AZ31 layers and to the development of elongated grains parallel to the rolling direction in Al 1050 layers. No new phases formed at the bond interface after the first ARB cycle while Mg 17 Al 12 and Mg 2 Al 3 phases appeared after subsequent cycles. During the ARB processing, a typical strong basal (0002) texture is observed in AZ31 layers along with a weak rolling texture showed in Al 1050 layers with a dominant Rotated Cube {001}〈110〉 component. The microhardness of Al1050/AZ31/ Al1050 laminated composite increased with increasing ARB cycles and almost saturated after five ARB cycles. The yield strength and ultimate strength increased gradually between 1 and 3 ARB cycles due to the strain hardening and grain refinement. They decreased with further increasing of the ARB cycles because of crack and failure of the Mg x Al y intermetallic compounds which developed during 4th and 5th ARB cycles. The deformation behavior of the laminated composite becomes rather similar to the behavior of AZ31 alloy that underwent a dynamic recrystallization during processing.