Cold atmospheric-pressure plasmas are currently in use in medicine as surgical tools and are being evaluated for new applications, including wound treatment and cosmetic care. The disinfecting properties of plasmas are of particular interest, given the threat of antibiotic resistance to modern medicine. Plasma effluents comprise (V)UV photons and various reactive particles, such as accelerated ions and radicals, that modify biomolecules; however, a full understanding of the molecular mechanisms that underlie plasma-based disinfection has been lacking. Here, we investigate the antibacterial mechanisms of plasma, including the separate, additive and synergistic effects of plasma-generated (V)UV photons and particles at the cellular and molecular levels. Using scanning electron microscopy, we show that plasma-emitted particles cause physical damage to the cell envelope, whereas UV radiation does not. The lethal effects of the plasma effluent exceed the zone of physical damage. We demonstrate that both plasma-generated particles and (V)UV photons modify DNA nucleobases. The particles also induce breaks in the DNA backbone. The plasma effluent, and particularly the plasma-generated particles, also rapidly inactivate proteins in the cellular milieu. Thus, in addition to physical damage to the cellular envelope, modifications to DNA and proteins contribute to the bactericidal properties of cold atmospheric-pressure plasma.

Hybrid organic-inorganic perovskites and in particular formamidinium lead halide (FAPbX, X = Cl, Br, I) perovskite nanocrystals (NCs) have shown great promise for their implementation in optoelectronic devices. Specifically, the Br and I counterparts have shown unprecedented photoluminescence properties, including precise wavelength tuning (530-790 nm), narrow emission linewidths (<100 meV) and high photoluminescence quantum yields (70-90%). However, the controlled formation of blue emitting FAPb(ClBr) NCs lags behind their green and red counterparts and the mechanism of their formation remains unclear. Herein, we report the formation of FAPb(ClBr) NCs with stable emission between 440 and 520 nm in a fully automated droplet-based microfluidic reactor and subsequent reaction upscaling in conventional laboratory glassware. The thorough parametric screening allows for the elucidation of parametric zones (FA-to-Pb and Br-to-Cl molar ratios, temperature, and excess oleic acid) for the formation of nanoplatelets and/or NCs. In contrast to CsPb(ClBr) NCs, based on online parametric screening and offline structural characterization, we demonstrate that the controlled synthesis of Cl-rich perovskites (above 60 at% Cl) with stable emission remains a challenge due to fast segregation of halide ions.

The structures of two types of guanidine-quinoline copper complexes have been investigated by single-crystal X-ray crystallography, K-edge X-ray absorption spectroscopy (XAS), resonance Raman and UV/Vis spectroscopy, cyclic voltammetry, and density functional theory (DFT). Independent of the oxidation state, the two structures, which are virtually identical for solids and complexes in solution, resemble each other strongly and are connected by a reversible electron transfer at 0.33 V. By resonant excitation of the two entatic copper complexes, the transition state of the electron transfer is accessible through vibrational modes, which are coupled to metal-ligand charge transfer (MLCT) and ligand-metal charge transfer (LMCT) states.

The effluent of a micro-scaled atmospheric pressure plasma jet (μ-APPJ) operated in helium with admixtures of water vapor (10 4 ppm) has been analyzed by means of cavity ring-down laser absorption spectroscopy and molecular beam mass spectrometry to measure hydroxyl (OH) radical densities, and by two-photon absorption laser-induced fluorescence spectroscopy to measure atomic oxygen (O) densities. Additionally, the performance of the bubbler as a source of water vapor in the helium feed gas has been carefully characterized and calibrated. The largest OH and O densities in the effluent of × − 2 10 cm 14 3 and × − 3.2 10 cm 13 3 , respectively, have been measured at around 6000 ppm. The highest selectivity is reached around 1500 ppm, where the OH density is at ∼63% of its maximum value and is 14 times larger than the O density. The measured density profiles and distance variations are compared to the results of a 2D axially symmetric fluid model of species transport and reaction kinetics in the plasma effluent. It is shown that the main loss of OH radicals in the effluent is their mutual reaction. In the case of O, reactions with other species than OH also have to be considered to explain the density decay in the effluent. The results presented here provide additional information for understanding the plasma-chemical processes in non-equilibrium atmospheric pressure plasmas. They also open the way to applying μ-APPJ with He/H 2 O as a selective source of OH radicals.

No abstract

No abstract

Cover: The image shows a modified version of a micro scale He/O 2 atmospheric pressure plasma jet (m-APPJ) source. The so-called X-Jet allows separation of gaseous particles from photons in the effluent downstream of the plasma. The separation is realized in the crossed-channel structure at the nozzle of the jet, where a direct channel (extension of the space between electrodes, where the plasma is located) is crossed by an additional side channel. A helium flow introduced through the side channel of this structure deflects all particles in the plasma effluent into the side channel. The photons, in contrast, are not affected by this additional gas flow and they can propagate undisturbed through the direct channel, which is filled by helium gas. The isolated effect of plasma generated photons or reactive radicals on any substrate placed under the channels can be examined in this way. Moreover, photochemistry reactions initiated by plasma generated photons with the gas mixture in the side channel can also be tested. Further details can be found in the article by S. Benedikt on page 561.

Magnetic skyrmions are stable topological solitons with complex non-coplanar spin structures. Their nanoscopic size and the low electric currents required to control their motion has opened a new field of research, skyrmionics, that aims for the usage of skyrmions as information carriers. Further advances in skyrmionics call for a thorough understanding of their three-dimensional (3D) spin texture, skyrmion–skyrmion interactions and the coupling to surfaces and interfaces, which crucially affect skyrmion stability and mobility. Here, we quantitatively reconstruct the 3D magnetic texture of Bloch skyrmions with sub-10-nanometre resolution using holographic vector-field electron tomography. The reconstructed textures reveal local deviations from a homogeneous Bloch character within the skyrmion tubes, details of the collapse of the skyrmion texture at surfaces and a correlated modulation of the skyrmion tubes in FeGe along their tube axes. Additionally, we confirm the fundamental principles of skyrmion formation through an evaluation of the 3D magnetic energy density across these magnetic solitons.