Paper diagnostics are of growing interest due to their low cost and easy accessibility. Conductive inks, necessary for manufacturing the next generation diagnostic devices, currently face challenges such as high cost, high sintering temperatures, or harsh conditions required to remove stabilizers. Here we report an effective, inexpensive, and environmentally friendly approach to graphene ink that is suitable for screen printing onto paper substrates. The ink formulation contains only pristine graphite, water, and non-toxic alkanes formed by an interfacial trapping method in which graphite spontaneously exfoliates to graphene. The result is a viscous graphene stabilized water-in-oil emulsion-based ink. This ink does not require sintering, but drying at 90 °C or brief microwaving can improve the conductivity. The production requires only 40 s of shaking to form the emulsion. The sheet resistance of the ink is approximately 600 Ω/sq at a thickness of less than 6 µm, and the ink can be stabilized by as little as 1 wt% graphite.
Ion partitioning behavior in electrolyte solutions plays an important role in drug delivery and therapeutics, protein folding, materials science, filtration, and energy applications such as supercapacitors. Here, we show that the segregation of ions in solutions also plays an important role in the exfoliation of natural flake graphite to pristine graphene. Polarizable anions such as iodide and acetate segregate to the interfacial region of the aqueous phase during solvent interfacial trapping exfoliation of graphene. Ordered water layers and accumulated charges near the graphene surface aid in separating graphene sheets from bulk graphite, and, more importantly, reduce the reversibility of the exfoliation event. The observed phenomenon results not only in the improved stability of graphene-stabilized emulsions but also in a low-cost and environmentally friendly way of enhancing the production of graphene.
The addition of poly(ethylene glycol) (PEG) to biomolecules and biomaterials is a well-established approach to modify their properties for therapeutic applications. For biomaterials, the approach is typically to blend or electrospray the synthetic polymer with the biomaterial. Effective surface modification approaches such as surface-initiated polymer brushes are challenging since the harsh solvents required for brush synthesis may destroy the biomaterial. Herein, we describe the PEGylation of collagen fibers by surface-initiated PEG brushes using a living anionic grafting-from mechanism. This brush synthesis is done in the absence of solvents to minimize the degradation of the native collagen structure. We quantify the effect the brush synthesis has on the native structure of the collagen fiber using differential scanning calorimetry (DSC) and find that even at long reaction times a significant fraction of the native structure remains. Dynamic mechanical analysis indicates the collagen undergoes only modest structural degradation, while adhesion studies find a significant improvement of antifouling properties. Further, our approach opens the way for further chemistry, as the growing polymer chain is a potassium alkoxy group that can be functionalized by termination or by subsequent reaction by a wide variety of molecules.
Passing-through polymerization is a technique for growing surface-initiated polymer brushes where monomers are supplied to the growing chains by diffusing through the initiator-functionalized surface. This inverts the monomer concentration gradient relative to conventional grafting-from mechanisms, allowing for the synthesis of thicker and more densely packed brushes. Here we use a combination of coarse-grained computer simulations and experimental techniques to demonstrate how this approach can be implemented, with swellable network-like substrates supplying monomers to the functionalized surface as they diffuse out of the swollen network. Compared to grafting-from polymer brushes, this method shows a higher contact angle and a greater brush mass. Additionally, we observed that the passing-through approach could lead to strain-induced crystallization in the brush layer or wrinkling of the brush surface, which we used to estimate the brush thickness. The developed method opens a path for large-scale synthesis of the brush-modified elastic substrates.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.