A low voltage operation electro-optic modulator is critical for applications ranging from optical communications to an analog photonic link. This paper reports a hybrid silicon nitride and lithium niobate electro-optic Mach–Zehnder modulator that employs 3 dB multimode interference couplers for splitting and combining light. The presented amplitude modulator with an interaction region length of 2.4 cm demonstrates a DC half-wave voltage of only 0.875 V, which corresponds to a modulation efficiency per unit length of 2.11 V cm. The power extinction ratio of the fabricated device is approximately 30 dB, and the on-chip optical loss is about 5.4 dB.

A small footprint, low voltage and wide bandwidth electro-optic modulator is critical for applications ranging from optical communications to analog photonic links, and the integration of thin-film lithium niobate with photonic integrated circuit (PIC) compatible materials remains paramount. Here, a hybrid silicon nitride and lithium niobate folded electro-optic Mach Zehnder modulator (MZM) which incorporates a waveguide crossing and 3 dB multimode interference (MMI) couplers for splitting and combining light is reported. This modulator has an effective interaction region length of 10 mm and shows a DC half wave voltage of roughly 4.0 V, or a modulation efficiency (Vπ ·L) of roughly 4 V·cm. Furthermore, the device demonstrates a power extinction ratio of roughly 23 dB and shows .08 dB/GHz optical sideband power roll-off with index matching fluid up to 110 GHz, with a 3-dB bandwidth of 37.5 GHz.

No abstract

Segmented, or slow-wave electrodes have emerged as an index-matching solution to improve bandwidth of traveling-wave Mach Zehnder and phase modulators on the thin-film lithium niobate on insulator platform. However, these devices require the use of a quartz handle or substrate removal, adding cost and additional processing. In this work, a high-speed dual-output electro-optic intensity modulator in the thin-film silicon nitride and lithium niobate material system that uses segmented electrodes for RF and optical index matching is presented. The device uses a silicon handle and does not require substrate removal. A silicon handle allows the use of larger wafer sizes to increase yield, and lends itself to processing in established silicon foundries that may not have the capability to process a quartz or fused silica wafer. The modulator has an interaction region of 10 mm, shows a DC half wave voltage of 3.75 V, an ultra-high extinction ratio of roughly 45 dB consistent with previous work, and a fiber-to-fiber insertion loss of 7.47 dB with a 95 GHz 3 dB bandwidth.

A low voltage, wide bandwidth compact electro-optic modulator is a key building block in the realization of tomorrow's communication and networking needs. Recent advances in the fabrication and application of thin-film lithium niobate, and its integration with photonic integrated circuits based in silicon make it an ideal platform for such a device. In this work, a high-extinction dual-output folded electro-optic Mach Zehnder modulator in the silicon nitride and thin-film lithium niobate material system is presented. This modulator has an interaction region length of 11 mm and a physical length of 7.8 mm. The device demonstrates a fiber-to-fiber loss of roughly 12 dB using on-chip fiber couplers and DC half wave voltage (Vπ) of less than 3.0 V, or a modulation efficiency (Vπ•L) of 3.3 V•cm. The device shows a 3 dB bandwidth of roughly 30 GHz. Notably, the device demonstrates a power extinction ratio over 45 dB at each output port without the use of cascaded directional couplers or additional control circuitry; roughly 31 times better than previously reported devices. Paired with a balanced photo-diode receiver, this modulator can be used in various photonic communication systems. Such a detecting scheme is compatible with complex modulation formats such as differential phase shift keying and differential quadrature phase shift keying, where a dualoutput, ultra-high extinction device is fundamentally paramount to low-noise operation of the system.