No abstract

Nano-structural particles of silica were synthesized from low-cost rice husk by acid leaching and further annealing at different temperatures.

No abstract

No abstract

In this work, the effect of the presence and the diffusion of the Copper from the tool electrode onto the EDMed stainless steel (SS) surface have been investigated by electrochemical impedance spectroscopy (EIS), X-ray diffraction (XRD), Quantometer analysis, and Optical microscopic observations. The Taguchi method was used to study the effects of Pulseon time (ton), Pulse-off time (toff), discharge current (I), and overall machining time (τ) on chemical composition, microstructures, micro-cracks, and electrochemical corrosion of EDMed stainless steel workpieces. The results show that the variation of machining parameters changes the chemical composition of the workpieces. By increasing the discharge current and decreasing the Pulse-on time, the copper and the carbon diffuse onto the surface of the workpiece. Consequently, the chemical composition of the workpiece surface changes, leading to an increment of the corrosion resistance. The XRD analysis shows the formation of Fe2C, Cr3C2, and CuNi. In addition, at higher values of discharge current and ton/toff ratio, the micro-cracks propagate on the surface of the workpiece.