No abstract

The aim of this study was to identify a physical property suitable for evaluating the orthodontic force by analyzing the physical properties of thermoplastic materials. Four thermoplastic materials were used: Essix A+ ® Plastic (EA), DURAN ® (DU), Erkodur (ER), and Essix C+ ® Plastic (EC). Finite element analysis (FEA), a water absorption test, constant strain loading test, X-ray diffraction (XRD) and Fourier transformation infrared spectroscopy analysis were conducted. FEA found a significant correlation between the elastic modulus and the orthodontic force. The water absorption of EC was significantly smaller than the other materials. EC showed no elastic modulus change. The XRD pattern indicated that EC was a crystalline polymer. FEA of thermoplastics showed that the elastic modulus is suitable for the evaluation of orthodontic force. The crystalline thermoplastic EC demonstrated a stable elastic modulus even under strain in a wet environment, suggesting the advantage of its use as an orthodontic aligner material.

The objective of this study was to assess the effect of silica nano-filler particle diameters in a computer-aided design/manufacturing (CAD/CAM) composite resin (CR) block on physical properties at the multi-scale in silico. CAD/CAM CR blocks were modeled, consisting of silica nano-filler particles (20, 40, 60, 80, and 100 nm) and matrix (Bis-GMA/TEGDMA), with filler volume contents of 55.161%. Calculation of Young's moduli and Poisson's ratios for the block at macro-scale were analyzed by homogenization. Macro-scale CAD/CAM CR blocks (3 × 3 × 3 mm) were modeled and compressive strengths were defined when the fracture loads exceeded 6075 N. MPS values of the nano-scale models were compared by localization analysis. As the filler size decreased, Young's moduli and compressive strength increased, while Poisson's ratios and MPS decreased. All parameters were significantly correlated with the diameters of the filler particles (Pearson's correlation test, r = -0.949, 0.943, -0.951, 0.976, p < 0.05). The in silico multi-scale model established in this study demonstrates that the Young's moduli, Poisson's ratios, and compressive strengths of CAD/CAM CR blocks can be enhanced by loading silica nanofiller particles of smaller diameter. CAD/CAM CR blocks by using smaller silica nano-filler particles have a potential to increase fracture resistance.

The highly accurate BCI using alpha waves was developed for controlling the robot arm, and real-time operation was succeeded by using noninvasive electrodes. The significant components of the alpha wave were identified by spectral analysis and confirmation of the amplitude of the alpha wave. When the alpha wave was observed in the subject, the subjects were instructed to select the multiple decision branches, concerning 7 motions (including "STOP") of a robot arm. As a result, high accuracy (70-95%) was obtained, and the subject succeeded in transferring a small box by controlling the robot arm. Since high accuracy was obtained by use of this method, it can be applied to control equipments such as a robot arm. Since the alpha wave can be easily generated, the BCI using alpha waves does not need more training than that using other signals. Moreover, we tried to reduce the false positive errors by effectively detecting artifacts using spectral analysis and detecting signals of 50 µV or more. As a result, the false positive errors could be reduced from 25% to 0%. Therefore, this technique shows great promise in the area of communication and the control of other external equipments, and will make great contribution in the improvement of Quality of Life (QOL) of mobility disabled.

The aim of this study was to investigate the orthodontic force exerted by thermoplastic orthodontic appliances incorporating Eucommiaulmoides in terms of usefulness as the aligner-type orthodontic device. Erkodur, Essix C+®, Eucommia elastomer, and edgewise brackets were used (n = 3, each; thickness = 1.0 mm, each). The orthodontic force on the upper right incisor was measured every 24 h for two weeks using a custom-made measuring device. The force of the Eucommia elastomer (4.25 ± 0.274 N) and multi bracket system (5.32 ± 0.338 N) did not change from the beginning to the end (p > 0.01). The orthodontic force exerted by the Eucommia elastomer was lower than that of the multi-bracket orthodontic appliance from the beginning to the end. The force of Erkodur significantly decreased from the beginning to 24 h (6.47 ± 1.40 N) and 48 h (3.30 ± 0.536 N) (p < 0.01). The force of Essix C+® significantly decreased from the beginning (13.2 ± 0.845 N) to 24 h (8.77 ± 0.231 N) (p < 0.01). The thermoplastic orthodontic appliance made of Eucommia elastomer continuously exerted a constant orthodontic force for two weeks under water immersion conditions. The orthodontic force of Eucommia elastomer was found to be similar to the orthodontic force exerted by the multi-bracket orthodontic appliance with 0.019 × 0.025 in nickel–titanium wire. These results suggest that the Eucommia elastomer has possibly become one of the more useful materials to form thermoplastic orthodontic appliance exerting low continues orthodontic force.