Safe and inexpensive energy storage devices with long cycle lifetimes and high power and energy densities are mandatory for the development of electrical power grids that connect with renewable energy sources. In this study, we demonstrated metal-free aqueous redox capacitors using couples comprising low-molecular-weight organic compounds. In addition to the electric double layer formation, proton insertion/extraction reactions between a couple consisting of inexpensive quinones/hydroquinones contributed to the energy storage. This energy storage mechanism, in which protons are shuttled back and forth between two electrodes upon charge and discharge, can be regarded as a proton rocking-chair system. The fabricated capacitor showed a large capacity (>20 Wh/kg), even in the applied potential range between 0–1 V, and high power capability (>5 A/g). The support of the organic compounds in nanoporous carbon facilitated the efficient use of the organic compounds with a lifetime of thousands of cycles.

Ultrathin SnS 2 nanoparticle decorated graphene nanosheet (GNS) electrode materials with delaminated structure were prepared using stepwise chemical modification of graphene oxide (GO) nanosheets at very dilute conditions, followed by a hydrothermal treatment. The chemical modification of the graphene nanosheet surface with Sn ions enables the precipitation of ultrathin nanoparticles. The TEM analysis reveals the SnS 2 nanoparticles are homogeneously distributed on the loosely packed graphene surface in such a way that the GNS restacking was hindered. X-ray photoelectron spectroscopic analysis reveals the bonding characteristics of the SnS 2 on the GNS. The obtained nanocomposite exhibits a reversible capacity of 1002 mAh/g, which is significantly higher than its calculated theoretical capacity (584 mAh/g). Furthermore, its cycling performance is enhanced and after 50 cycles, and the charge capacity still remained 577 mAh/g, which is very close to its theoretical capacity. Due to the synergic effect, the Li-ion storage capacity observed for nanocomposites is much higher than its theoretical capacity. The ultrathin size (2 nm) and dimensional confinement of tin sulfide nanoparticles by the surrounding GNS limit the volume expansion upon lithium insertion, and the nanoporous structures serve as buffered spaces during charge/discharge and result in superior cyclic performances by facilitating the electrolyte to contact the entire nanocomposite materials and reduce lithium diffusion length in the nanocomposite.

No abstract

No abstract

No abstract