SummaryIn the present paper, numerical investigations was carried out on a 1:45 scaled model of DSI nine sided polygonal non-ship shaped FPSO, by varying different parameters of the model. Parameters such as inlet pipe radius, and moonpool radius was considered for the study and the variation of the RAO in surge and heave were plotted and reported in the present paper. Previously, experiment were conducted by the author on a 1:45 scale DSI nine sided polygonal non-ship shaped FPSO model with three different mooring arrangements viz. 100% turret mooring, 50% vessel and 50% turret mooring, and 100% vessel mooring. Author also conducted experiments on the model with different sizes of damping plates attached at the keel and skirt portion of the model to study its influence on the responses of the vessel and comparison was made with numerical result obtained from Wave analysis, MIT (WAMIT) software. Numerical study was carried out in WAMIT on the scaled model and the results were compared with those obtained from model tests in the wave basin.
Este estudio presenta la investigación experimental llevada a cabo en una columna de hormigón de arcilla expandida confinada por tubo de acero perforado reforzado por láminas de polímero reforzado con fibra de vidrio (GFRP) bajo compresión uniaxial. Se consideraron dos parámetros para la investigación experimental: El diámetro del tubo de acero perforado (5 mm y 10 mm) y el número de capas de envoltura GFRP (1,2, 3 y 4 capas). El comportamiento de compresión de la columna confinada de acero perforado se comparó con la columna de hormigón encerrada de tubo GFRP y la columna de hormigón encerrada de tubo de acero liso. Se discutió el efecto del diámetro de perforación y las capas GFRP, en el patrón de falla, la respuesta de tensión-deformación unitaria y la ductilidad de la columna. A partir de este estudio, se puede concluir que el envoltorio GFRP y el tubo de acero perforado ejercen todo el potencial para mejorar el comportamiento de compresión de la columna de hormigón agregado de arcilla expandida. El modo de falla de la columna de tubo de acero perforado envuelto GFRP era dúctil en la naturaleza. La falla comenzó con la ruptura de las capas de GFRP seguidas de la producción de tubo de acero perforado y finalmente la trituración de hormigón central. El envoltorio GFRP proporciona resistencia a la tracción adicional a la columna y al tubo de acero perforado con su comportamiento plástico elasto mejora el comportamiento previo y posterior al pico de la columna. Se observó un mejor rendimiento de ductilidad en la columna con un mayor número de envoltura y columna GFRP con perforación de 10 mm de diámetro.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.