Indonesia merupakan negara yang banyak memiliki pulau serta pegunungan, ada sejumlah daerah merupakan daerah terpencil yang tidak mendapatkan pasokan energi listrik PT PLN Persero. Untuk pemenuhan kebutuhan energi listrik di daerah tersebut dapat menggunakan sumber energi alternatif tenaga surya sebagai Pembangkit Listrik Tenaga Surya (PLTS). Penggunaan energi surya menjadi energi listrik menggunakan sel surya banyak dipengaruhi oleh kondisi lingkungan. Kegiatan ini bertujuan untuk mengetahui sejauh mana pengaruh lingkungan terhadap kinerja PLTS. Photovoltaic yang digunakan dalam pengujian ini type 50-110-210 buatan PT.
The purpose of this community service program is to apply the rotary dryer unit to the production of herbal herbs that do not require solar heat. Target on the management aspect, partners are able to manage business with standard business management. Partners have an entrepreneurial spirit and have a strong spirit. Activities are carried out with coordination and discussion with partners. A meeting to determine the capacity of the rotary dryer unit and the needs of electrical energy and heat sources. Whereas for the herbal medicine business entrepreneur group, coordination was carried out to determine the material and motivation management training to foster an entrepreneurial spirit. The rotary dryer unit consists of two main parts, namely: air heater and rotary dryer cylinder. Air heater is made from a range of 3/4 inch diameter mild steel pipes, while the shell wall is made of mild steel plates with 1.2 mm thickness. For air plants centrifugal blowers are used with a 2 inch pipe diameter. A heat source is used by a single burner with LPG fuel. The rotary dryer cylinder, is a concentric tube, from a perforated stainless steel plate used as a place for dried simplicia. While the outer tube is made of mild steel plates. The tube is rotated using a 200 Watt one pasha electric motor. Improved business management with standard management to improve marketing efficiency and development.
Genteng merupakan salah satu komponen penting pembangunan perumahan yang memiliki fungsi untuk melindungi rumah dari suhu,hujan maupun fungsi lainnya. Agar kualitas genteng optimal, maka daya serap air harus seminimal munhkin, agar kebocoran dapat diminimalisir. Metode yang digunakan untuk mengoptimalkan daya serap air genteng adalah Taguchi. Dalam penelitian ini terdiri 4 variabel bebas masing-masing 2 level faktor yaitu tanahliat, (80% dan 85%), Pasir (14% dan 10%), semen merah (5%t dan 3.5%), Dolumite (1% dan 1.5%)). Sedangkan variabel responnya adalah daya serap air. Karakteristik kualitas yang digunakan adalah smaller the better. Berdasarkan Analysis of Variansi menunjukkan bahwa untuk mengoptimalkan daya serap air, agra genteng tidak mudah bocor komposisi tanah liat, pasir, semen merah dan dolumite memberikan persen kontribusi masing-masing 16.45%, 19.69%, 20.59% dan 5.27%. Kondisi optimal daya serap air dicapai pada variasi A1B1C1D2, artinya komposisi tanah liat 80%, pasir 14%, semen merah 5% dan dolumite 1.5%. Perbandingan variasi kondisi sebelum dan sesudah dilakukan penelitian menunjukkan bahwa terjadi peningkatan nilai S/N dari (-20.454 menjadi-18.712), penurunan stadart deviasi drai (1.553 menjadi 1.25). Nilai Cp dan CPk mengalami peningkatan dari (0.999 menjadi 1.234), artinya bahwa proses pembuatan genteng Soka, capable karena nilai Cp>1 seiring dengan meningkatnya fungsi nilai keuntungan sebesar 34.4 cents/$1loss.
Limbah proses destilasi (penyulingan) minyak atsiri daun cengkeh yang berupa daun cengkeh kering sering dianggap sebagai limbah industri dan kurang diperhatikan manfaatnya. Diperkirakan saat ini penggunaan daun cengkeh kering sisa proses destilasi minyak atsiri hanya digunakan sebagai pendukung dari pembakaran proses penyulingan tersebut. Oleh karena itu penting adanya penelitian untuk mengurangi polusi yang ditimbulkan oleh limbah tersebut,diantaranya dengan menjadikan daun cengkeh kering sisa proses sebagai bahan dasar biomassa. Penelitian diawali dengan pengumpulan bahan dasar berupa daun cengkeh sisa proses destilasi daun cengkeh dan arang kayu kemudian dihancurkan dan selanjutnya dicampur dengan variasi komposisi yang berbeda . Variasi yang digunakan adalah variasi komposisi, yaitu 100% arang kayu, 100% daun cengkeh, 80% arang kayu dan 20% daun cengkeh, 60% arang kayu dan 40% daun cengkeh, 40% arang kayu dan 60% daun cengkeh. Pengujian karakteristik pembakaran dilaksanakan untuk mengetahui karakteristik temperatur pembakaran, massa sisa dan laju pembakaran yang dihasilkan oleh campuran arang kayu dan daun cengkeh. Pengujian ini dilakukan pada sebuah tungku pembakaran dan pengambilan data dilakukan setiap 1 menit. Hasil penelitian menunjukkan bahwa variasi komposisi berpengaruh pada karakteristik pembakaran.Penambahan arang kayu akan mempertinggi temperatur pembakaran dan memperlama waktu pembakaran.Waktu pembakaran paling baik dimiliki biomassa dengan komposisi 60% arang kayu dan 40% daun cengkeh dengan temperatur 268°C pada menit ke-6 dan massa sisanyayakni 0,71 gram.
Gasoline motorcycles are a means of transportation that is currently the most in-demand by the people of Indonesia. Most of the youth are waiting for gasoline-fueled motorbikes with superior performance so many lovers from the automotive sector, researchers and industry make modifications to improve the performance of these vehicles. This study aims to improve the performance of the gasoline engine. The research method used is to modify the exhaust manifold on the combustion engine. Modifications are made by adding a Torque Expansion Chamber (TEC) 1 tube 2 channels and variations of nozzles 40, 50, and 60. The next step is to test torque, power, and specific fuel consumption. The results show that the use of 1 tube 2 channel TEC and variations of nozzles 40, 50, and 60 can increase torque, increase power and reduce specific fuel consumption. The highest torque of 9.94 Nm was obtained at 5500 rpm using 1 tube 2 channel TEC and 50 nozzle variations. The highest power of 8.03 HP was obtained at 6250 rpm using 1 tube 2 channel TEC and 50 nozzle variations. Minimum specific fuel consumption with a value of 0.14145 kg/kWh was obtained by using TEC 1 tube 2 channel and nozzle variation 40. Increasing torque by using modified TEC 1 tube 2 channel and nozzle variation 40, 50, and 60 is due to back pressure so that heat that comes out with the exhaust gases is not completely removed by the environment. The increase in power is caused because the power is directly proportional to the torque, while the decrease in specific fuel consumption is caused because the specific fuel consumption is inversely proportional to the power.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.