The lengthy time periods required by current spalting methods prohibit the economically viable commercialization of spalted wood on a large scale. This work aimed to compare the effects of induced spalting in 16 Pacific Northwest woods using three common spalting fungi,Chlorociboria aeruginosa, Scytalidium cuboideum, andScytalidium ganodermophthorum, with the significantly less time-consuming treatment of these woods using dichloromethane-extracted green, red, and yellow pigments from the same fungi. For pigment extracts, the dosage required for a pigment to internally color various wood species to 30% internal coverage was investigated. With few exceptions, treatment with pigment extracts outperformed induced spalting in terms of percent internal color coverage. Cottonwood consistently performed best with all three pigment solutions, although chinkapin performed as well as cottonwood with the red pigment, and Port Orford cedar performed as well with the yellow pigment. While no wood species showed 30% internal color coverage with the green pigment solution, a number of additional species, including pacific silver fir, madrone, dogwood, and mountain hemlock showed internal color coverage on the order of 20–30% for red and/or yellow. Cottonwood was determined to be the best suited wood species for this type of spalting application.

Organic semiconductors are of interest for (opto)electronic applications due to their low cost, solution processability, and tunable properties. Recently, natural product-derived organic pigments attracted attention due to their extraordinary environmental stability and unexpectedly good optoelectronic performance, in spite of only partially conjugated molecular structure. Fungi-derived pigments are a naturally sourced, sustainable class of materials that are largely unexplored as organic semiconductor materials. We present a study of the optical and electronic properties of a fungi-derived pigment xylindein, which is secreted by the wood-staining fungi Chlorociboria aeruginosa , and its blends with poly(methyl methacrylate) (PMMA) and crystalline nanocellulose (CNC). Optical absorption spectra of xylindein revealed the presence of two tautomers whose structures and properties were established using density functional theory. Pronounced pigment aggregation in polar solvents and in films, driven by intermolecular hydrogen bonding, was also observed. The pigment exhibited high photostability, electron mobility up to 0.4 cm 2 /(V s) in amorphous films, and thermally activated charge transport and photoresponse with activation energies of ∼0.3 and 0.2 eV, respectively. The dark and photocurrents in xylindein:PMMA blends were comparable to those in pristine xylindein film, whereas blends with CNC exhibited lower currents due to inhomogeneous distribution of xylindein in the CNC.

Intarsia was an art form popular between the 15th–18th centuries that used wood pigmented by spalting fungi to create detailed landscapes, portraits, and other imagery. These fungi are still used today in art but are also finding relevance in material science as elements of solar cells, textile dyes, and paint colorants. Here we show that the spalting fungus Scytalidium cuboideum (Sacc. and Ellis) Sigler and Kang produces a red/pink pigment that forms two distinct colors of crystals (red and orange)—a very rare occurrence. In addition, a second structure of the crystal is proved through nuclear magnetic resonance (NMR). This is only the second instance of a stable, naphthoquinone crystal produced by a fungus. Its discovery is particularly valuable for solar cell development, as crystalline materials have a higher electrical conductivity. Other fungi in this order have shown strong potential as thin films for solar cells.

We present on the optical and electronic properties of a fungi-derived pigment xylindein for potential use in (opto)electronic applications. Optical absorption spectra in solutions of various concentrations and in film are compared and are consistent with aggregate formation in concentrated solutions and films. In order to improve film morphology obtained by solution deposition techniques, an amorphous polymer PMMA was introduced to xylindein to form xylindein:PMMA blends. Current-voltage characteristics and hole mobilities extracted from space-charge limited currents were found to be comparable between pristine xylindein and xylindein:PMMA films. Side by side comparison of the photoresponse of pristine xylindein and xylindein:PMMA films at 633 nm revealed an increase in the photosensitivity in xylindein:PMMA films due to the improved morphology favouring enhanced charge generation.

No abstract

Pigments that are currently available in the market usually come from synthetic sources, or, if natural, often need mordants to bind to the target substrate. Recent research on the fungal pigment extracts from Scytalidium cuboideum, Scytalidium ganodermophthorum, Chlorociboria aeruginosa, and Chlorociboria aeruginascens have been shown to successfully dye materials, like wood, bamboo, and textiles, however, there is no information about their binding mechanisms. Due to this, a microscopic study was performed to provide information to future manufacturers interested in these pigments. The results of this study show that S. ganodermophthorum and C. aeruginosa form an amorphous layer on substrates, while S. cuboideum forms crystal-like structures. The attachment and morphology indicate that there might be different chemical and physical interactions between the extracted pigments and the materials. This possibility can explain the high resistance of the pigments to UV light and color fastness that makes them competitive against synthetic pigments. These properties make these pigments a viable option for an industry that demands natural pigments with the properties of the synthetic ones.

Fungal pigments, specifically those generated from spalting fungi, are being developed for broader use in the wood and textile industry, and due to their coloration properties, may also be useful as aesthetic bamboo dyes. This paper evaluates the potential use of fungal pigments in bamboo (Phyllostachys spp.), and compares the difference between natural spalting and the direct application of extracted fungal pigments of three known spalting fungi: Scytalidium cuboideum, Scytalidium ganodermophthorum, and Chlorociboria aeruginosa. Bamboo was significantly spalted by S. cuboideum under live inoculation, while the other two fungi did not colonize. For the direct application of fungal pigments, bamboo did not develop internal pigmentation with any pigment, but did develop visible surface color for S. cuboideium and C. aeruginosa. Light microscopy and scanning electron microscopy confirmed the presence of hyphae in bamboo vessels and parenchyma. An HPLC analysis for simple sugars showed the presence of glucose but no sucrose. Results indicate that the extracted pigments of the aforementioned fungi are ideal for the surface treatment of bamboo, while only direct inoculation of S. cuboideum is appropriate for internal coloration.

No abstract