a b s t r a c tDense carbon nanotubes (CNTs) were grown uniformly on the surface of carbon fibers and glass fibers to create hierarchical fibers by use of floating catalyst chemical vapor deposition. Morphologies of the CNTs were investigated using scanning electronic microscope (SEM) and transmission electron microscope (TEM). Larger diameter dimension and distinct growing mechanism of nanotubes on glass fiber were revealed. Short carbon and glass fiber reinforced polypropylene composites were fabricated using the hierarchical fibers and compared with composites made using neat fibers. Tensile, flexural and impact properties of the composites were measured, which showed evident enhancement in all mechanical properties compared to neat short fiber composites. SEM micrographs of composite fracture surface demonstrated improved adhesion between CNT-coated fiber and the matrix. The enhanced mechanical properties of short fiber composites was attributed to the synergistic effects of CNTs in improving fiber-matrix interfacial properties as well as the CNTs acting as supplemental reinforcement in short fiber-composites.

Carbon nanotubes (CNT) and short carbon fibers were incorporated into an epoxy matrix to fabricate a high performance multiscale composite. To improve the stress transfer between epoxy and carbon fibers, CNT were also grown on fibers through chemical vapor deposition (CVD) method to produce CNT grown short carbon fibers (CSCF). Mechanical characterization of composites was performed to investigate the synergy effects of CNT and CSCF in the epoxy matrix. The multiscale composites revealed significant improvement in elastic and storage modulus, strength as well as impact resistance in comparison to CNT-epoxy or CSCF-epoxy composites. An optimum content of CNT was found which provided the maximum stiffness and strength. The synergic reinforcing effects of combined fillers were analyzed on the fracture surface of composites through optical and scanning electron microscopy (SEM).

No abstract

Hierarchically structured hybrid composites are ideal engineered materials to carry loads and stresses due to their high in-plane specific mechanical properties. Growing carbon nanotubes (CNTs) on the surface of high performance carbon fibres (CFs) provides a means to tailor the mechanical properties of the fibre-resin interface of a composite. The growth of CNT on CF was conducted via floating catalyst chemical vapor deposition (CVD). The mechanical properties of the resultant fibres, carbon nanotube (CNT) density and alignment morphology were shown to depend on the CNT growth temperature, growth time, carrier gas flow rate, catalyst amount, and atmospheric conditions within the CVD chamber. Carbon nanotube coated carbon fibre reinforced polypropylene (CNT-CF/PP) composites were fabricated and characterized. A combination of Halpin-Tsai equations, Voigt-Reuss model, rule of mixture and Krenchel approach were used in hierarchy to predict the mechanical properties of randomly oriented short fibre reinforced composite. A fractographic analysis was carried out in which the fibre orientation distribution has been analyzed on the composite fracture surfaces with Scanning Electron Microscope (SEM) and image processing software. Finally, the discrepancies between the predicted and experimental values are explained.

In spite of several researches to synthesize carbon nanotubes (CNTs) on carbon fiber (CF), most have obtained entangled nanotubes versus the aligned form. In this study, by controlling catalyst coating technique, vertically aligned CNT were grown on CF through chemical vapor deposition (CVD). Activated fiber surface originated from acid treatment, compact coverage of catalyst precursor via applying ultrasonication in appropriate solvent, followed by calcinating were effective parameters which resulted in growing bundles and vertically aligned CNT on CF. Ethanol and acetone were examined as solvent thereby spot catalyst coating was created from the former while film coverage produced from the later and resulted in distinctive CNT morphology.

The sensitivity for diagnosing a meniscal tear was significantly higher when the tear involved more than one-third of the meniscus or the anterior horn. The sensitivity was significantly lower for tears located in the posterior horn and for vertically oriented tears. Therefore, special attention should be given to the peripheral posterior horns of the meniscus, which are common sites of injury that could be easily missed on MRI. The high NPVs obtained in this study suggest that MRI is a valuable tool prior to arthroscopy.

No abstract

Sustainability has become an important concept in economic growth and development in the world. Malaysia, as a rapidly developing economy in Asia, has been able to achieve a positive economic growth; however, there is a big question: is it on a sustainable growth path? Due to weaknesses of traditional GDP in reflecting sustainability path, Green GDP as an indicator of sustainability could be implemented with adjustments in calculations. This paper aims to calculate the Green GDP for Malaysia. This measure will almost give policy makers a more arguable estimate for the area of environmental challenges. This paper highlights the role of natural resources depletion and environmental damages in sustainable development of the country. Green GDP is associated with some uncertainties such as lack of comprehensive calculations in estimating data and difficulties in setting the price of natural resources. These uncertainties and how Malaysia would be able to implement more accurate Green GDP in future were also discussed.