The purpose of this study was to evaluate the influence of storage temperature and flask agitation on the water sorption (WS) and solubility (SL) of simplified adhesive systems. Seventy-two disc-shaped specimens were prepared according to the adhesive system (water/ethanol-based: Adper Single Bond 2; and water-based: One Coat Bond SL) and experimental conditions tested (mechanical agitation and storage temperature). Statistical analysis (3-way ANOVA, alpha=5%) found significantly greater WS and SL means for the water/ethanol-based system when compared to the water-based. Irrespective of factors studied, significant differences in WS and SL were noted between cold and room temperatures, with greater values been obtained at 1°C, and lower ones at 20°C. Agitation provided increased WS for both materials at all temperatures, but did not affect their SL. The mechanical agitation of the flask may negatively affect the dynamics of diffusion of simplified adhesive systems, even at extremely cold or warm temperatures.
Recent research on novel cost-effective adsorbent materials suggests potential use of industrial wastes for effluent treatment, with the added benefit of reuse of the wastes. Waste steel materials, including blast oxygen furnace sludge (BOFS), blast furnace sludge (BFS), and blast furnace dust (BFD), were investigated as low-cost adsorbents for removal of an oil emulsion and RR195 dye. The residues were characterized by X-ray diffraction, Brunauer-Emmett-Teller area, volume and distribution of pore diameters, Mössbauer spectroscopy, X-ray fluorescence, granulometry, scanning electron microscopy/energy dispersive spectroscopy, and pHpzc. Adsorption kinetics data were obtained by UV-vis spectrophotometry at the maximum absorption wavelength of the dye solution and crude oil emulsion. The use of waste as an adsorbent was more efficient for treatment of the oil emulsion than the dye solution. BOFS had higher total organic carbon (TOC) removal efficiency than the other waste materials. For the RR195 dye, good color removal was observed for all adsorbents, >90 % within 24 h. TOC removal was poor, <10 % for BFD and BFS and a maximum of 37 % for BOFS. For the oil emulsion, 97 % TOC removal was obtained by adsorption onto BOFS and 87 % onto BFS.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.