Smart technologies are advancing, and smart cities can be made smarter by increasing the connectivity and interactions of humans, the environment, and smart devices. This paper discusses selective technologies that can potentially contribute to developing an intelligent environment and smarter cities. While the connectivity and efficiency of smart cities is important, the analysis of the impact of construction development and large projects in the city is crucial to decision and policy makers, before the project is approved. This raises the question of assessing the impact of a new infrastructure project on the community prior to its commencement—what type of technologies can potentially be used for creating a virtual representation of the city? How can a smart city be improved by utilizing these technologies? There are a wide range of technologies and applications available but understanding their function, interoperability, and compatibility with the community requires more discussion around system designs and architecture. These questions can be the basis of developing an agenda for further investigations. In particular, the need for advanced tools such as mobile scanners, Geospatial Artificial Intelligence, Unmanned Aerial Vehicles, Geospatial Augmented Reality apps, Light Detection, and Ranging in smart cities is discussed. In line with smart city technology development, this Special Issue includes eight accepted articles covering trending topics, which are briefly reviewed.
Purpose This paper aims to present the sustainable performance criteria for 3D printing practices, while reporting the primarily computations and lab experimentations. The potential advantages for integrating three-dimensional (3D) printing into house construction are significant in Construction Industry 4.0; these include the capacity for mass customisation of designs and parameters for functional and aesthetic purposes, reduction in construction waste from highly precise material placement and the use of recycled waste products in layer deposition materials. With the ultimate goal of improving construction efficiency and decreasing building costs, applying Strand7 Finite Element Analysis software, a numerical model was designed specifically for 3D printing in a cement mix incorporated with recycled waste product high-density polyethylene (HDPE) and found that construction of an arched truss-like roof was structurally feasible without the need for steel reinforcements. Design/methodology/approach The research method consists of three key steps: design a prototype of possible structural layouts for the 3DSBP, create 24 laboratory samples using a brittle material to identify operation challenges and analyse the correlation between time and scale size and synthesising the numerical analysis and laboratory observations to develop the evaluation criteria for 3DSBP products. The selected house consists of layouts that resemble existing house such as living room, bed rooms and garages. Findings Some criteria for sustainable construction using 3DP were developed. The Strand7 model results suggested that under the different load combinations as stated in AS1700, the maximum tensile stress experienced is 1.70 MPa and maximum compressive stress experienced is 3.06 MPa. The cement mix of the house is incorporated with rHDPE, which result in a tensile strength of 3 MPa and compressive strength of 26 MPa. That means the house is structurally feasible without the help of any reinforcements. Investigations had also been performed on comparing a flat and arch and found the maximum tensile stress within a flat roof would cause the concrete to fail. Whereas an arch roof had reduced the maximum tensile stress to an acceptable range for concrete to withstand loadings. Currently, there are a few 3D printing techniques that can be adopted for this purpose, and more advanced technology in the future could eliminate the current limitation on 3D printing and bring forth this idea as a common practice in house construction. Originality/value This study provides some novel criteria for evaluating a 3D printing performance and discusses challenges of 3D utilisation from design and managerial perspectives. The criteria are relied on maximum utility and minimum impact pillars which can be used by scholars and practitioners to measure their performance. The criteria and the results of the computation and experimentation can be considered as critical benchmarks for future practices.
Delay is one of the main challenges of construction projects, and there is still much to overcome in order to reach near zero delay in all construction projects. This project aims to conduct a systematic critical review including a bibliography analysis on delay literature in construction. The main questions consider what has been learnt from a decade investigating delay causes and effects in the construction literature and what factors have been missed in the literature. This paper also presents a new and challenging question regarding how digital tools and associated technologies may prevent any delay in construction projects, which can change the research direction from delay investigations to identifying prevention factors. The paper identifies the delay dataset, including 493 papers investigating delay in construction, and establishes a specific dataset of papers focusing on delay effects and causes (DEC), including 94 selected papers covering different factors examined in over 29 countries such as Iran, India, Turkey, Bangladesh, Saudi Arabia, the United Arab Emirates (UAE), Cambodia, Oman, Malaysia, Taiwan, China, Vietnam, the US, the UK, and Egypt. In addition, the paper identifies 30 critical factors with the frequency of occurrences over three times in the DEC dataset and computes their medians of ranking. This paper also discusses digital tools and methods that can be used for delay analysis and preventions, including MS Project, Oracle Primavera P6, and Open Plan by Deltek. The paper discusses the project schedule delay analysis from project management methodology perspectives. It also discusses the current method's limitations and future directions, which are based on the identification of the deficiency areas. In total, four overlooked factors are identified and suggested, including faulty data analysis, unmatched structure of the research questionnaires with new knowledge and standards [e.g., Project Management Body of Knowledge (PMBOK)], overlooked effects of digital technologies [e.g., Digital twin, Navisworks, Building Information Model (BIM), Geographic Information System (GIS), and Integrated Project Delivery (IPD)], and ignored job-site technologies. In addition, the paper presents the DEC model for future studies, including four main key factors. These factors are resources (e.g., project budgets, labour, material, equipment, and digital tool), project context, stakeholders performance (e.g., owner/client, consultant/designer, contractor, vendor/supplier), and external factors (e.g., ground condition, site location, regulation, natural disaster), which may significantly affect delay prevention and should be concurrently considered in the future delay investigations, since they may be required for designing an effective mitigation strategy when these proof points are identified. This would significantly help to utilise digital systems to prevent time overruns in different construction contexts. Several cases of 24 projects were delayed more than 100% of contract duration [44]. Indonesia 38% o...
This article reviewed the state-of-the-art applications of the Internet of things (IoT) technology applied in homes for making them smart, automated, and digitalized in many respects. The literature presented various applications, systems, or methods and reported the results of using IoT, artificial intelligence (AI), and geographic information system (GIS) at homes. Because the technology has been advancing and users are experiencing IoT boom for smart built environment applications, especially smart homes and smart energy systems, it is necessary to identify the gaps, relation between current methods, and provide a coherent instruction of the whole process of designing smart homes. This article reviewed relevant papers within databases, such as Scopus, including journal papers published in between 2010 and 2019. These papers were then analyzed in terms of bibliography and content to identify more related systems, practices, and contributors. A designed systematic review method was used to identify and select the relevant papers, which were then reviewed for their content by means of coding. The presented systematic critical review focuses on systems developed and technologies used for smart homes. The main question is ”What has been learned from a decade trailing smart system developments in different fields?”. We found that there is a considerable gap in the integration of AI and IoT and the use of geospatial data in smart home development. It was also found that there is a large gap in the literature in terms of limited integrated systems for energy efficiency and aged care system development. This article would enable researchers and professionals to fully understand those gaps in IoT-based environments and suggest ways to fill the gaps while designing smart homes where users have a higher level of thermal comfort while saving energy and greenhouse gas emissions. This article also raised new challenging questions on how IoT and existing developed systems could be improved and be further developed to address other issues of energy saving, which can steer the research direction to full smart systems. This would significantly help to design fully automated assistive systems to improve quality of life and decrease energy consumption.
Additive manufacturing, including 3D printing (3DP), is one of the critical pillars of Industry 4.0 and the next construction revolution. Several countries, including China, have utilized 3DP on larger scales or real projects. However, reviews of the lessons learned from previous large-sized practices of 3DP utilization are scarce. This paper presents a few practical applications of implementing 3DP over the past decade and suggests a direction for future research work. Recent publications on 3DP practices are systematically reviewed using an interpretivist philosophical lens, and more specifically, the nozzle characteristics are focused upon. The Scopus and China National Knowledge Infrastructure (CNKI) journal databases are utilized, resulting in the examination of 54 English and 62 Chinese papers. The selected practices from Mainland China, Hong Kong, Taiwan and Macao are considered for this review. A content critical review approach is adopted, and the identified papers are critically reviewed. These papers reported key challenges and advantages from their reported practices, such as limitations in aggregate sizes, nozzle sizes, standards, post-occupancy satisfaction, final product quality, productivity challenges and other associated risks. The paper reports upon prominent limitations and signposts directions for future investigations.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.