No abstract

No abstract

We present a luminescence oxygen sensor integrated with a wireless intraocular microrobot for minimally-invasive diagnosis. This microrobot can be accurately controlled in the intraocular cavity by applying magnetic fields. The microrobot consists of a magnetic body susceptible to magnetic fields and a sensor coating. This coating embodies Pt(II) octaethylporphine (PtOEP) dyes as the luminescence material and polystyrene as a supporting matrix, and it can be wirelessly excited and read out by optical means. The sensor works based on quenching of luminescence in the presence of oxygen. The excitation and emission spectrum, response time, and oxygen sensitivity of the sensor were characterized using a spectrometer. A custom device was designed and built to use this sensor for intraocular measurements with the microrobot. Due to the intrinsic nature of luminescence lifetimes, a frequency-domain lifetime measurement approach was used. An alternative sensor design with increased performance was demonstrated by using poly(styrene-co-maleic anhydride) (PS-MA) and PtOEP nanospheres.

No abstract

We propose a novel multifrequency phase-modulation method for luminescence spectroscopy that uses a rectangular-wave modulated excitation source with a short duty cycle. It is used for obtaining more detailed information about the luminescence system: the information provided by different harmonics allows estimating a model for describing the global frequency response of the luminescent system for a wide range of analyte concentration and frequencies. Additionally, the proposed method improves the accuracy in determination of the analyte concentration. This improvement is based on a simple algorithm that combines multifrequency information provided by the different harmonics of the rectangular-wave signal, which can be easily implemented in existing photoluminescence instruments by replacing the excitation light source (short duty cycle rectangular signal instead of sinusoidal signal) and performing appropriate digital signal processing after the transducer (implemented in software). These claims have been demonstrated by using a well-known oxygen-sensing film coated at the end of an optical fiber [a Pt(II) porphyrin immobilized in polystyrene]. These experimental results show that use of the proposed multifrequency phase-modulation method (1) provides adequate modeling of the global response of the luminescent system (R(2) > 0.9996) and (2) decreases the root-mean-square error in analytical determination (from 0.1627 to 0.0128 kPa at 0.5 kPa O2 and from 0.9393 to 0.1532 kPa at 20 kPa O2) in comparison with a conventional phase-modulation method based on a sinusoidally modulated excitation source (under equal luminous power conditions).

A doubly pyrene-grafted bis-cyclometallated iridium complex with engineered electronically excited states demonstrates reversible electronic energy transfer between adjacent chromophores giving rise to extremely long-lived red luminescence in solution (τ = 480 μs). Time-resolved spectroscopic studies afforded determination of pertinent photophysical parameters including rates of energy transfer and energy distribution between constituent chromophores in the equilibrated excited molecule (ca. 98% on the organic chromophores). Incorporation into a nanostructured metal-oxide matrix (AP200/19) gave highly sensitive O2 sensing films, as the detection sensitivity was 200-300% higher than with the commonly used PtTFPP and approaches the sensitivity of the best O2-sensing dyes reported to date.

The accurate and real-time measurement of low and ultra-low concentrations of oxygen using non-invasive methods is a necessity for a multitude of applications, from brewing beer to developing encapsulating barriers for optoelectronic devices. Current optical methods and sensing materials often lack the necessary sensitivity, signal intensity, or stability for practical applications. In this report we present a new optical sensing nanocomposite resulting in an outstanding overall performance when combined with the phase-shift measurement method (determination of luminescence lifetime in the frequency domain). For the first time we have incorporated the standard PtTFPP dye (PtTFPP = platinum(II) 5,10,15,20-meso-tetrakis-(2,3,4,5,6-pentafluorophenyl)-porphyrin) into AP200/19, a nanostructured aluminium oxide-hydroxide solid support. This sensing film shows an excellent sensitivity between 0 and 1% O₂ (KSV = 3102 ± 132 bar⁻¹) and between 0 and 10% O₂ (KSV = 2568 ± 614 bar⁻¹) as well as Δτ0.05% (62.53 ± 3.66%), which makes it 62 times more sensitive than PtTFPP immobilized in polystyrene and also 8 times more sensitive than PtTFPP immobilized on silica beads. Furthermore the phase-shift measurement method results in a significant improvement (about 23 times) in stability compared to the use of intensity recording methods. The film also displays full reversibility, long shelf stability (no change observed after 12 months), and it is not affected by humidity. To establish this sensing methodology and develop sensors over the full range of the visible light, we also studied three other dye-AP200/19 nanocomposites based on phosphorescent cyclometalated iridium(III) complexes.

The comparison of scenarios of classification is highlighted. This term is referred to the combination of classifiers and analytical data.