Although the consequences of adhesive residues from post-consumer Poly(ethylene terephthalate) (PET) beverage bottles on the performance of recycled products are known, the quantitative effects of these adhesives are not well-stablished in the literature. Therefore, these residues were determined by gravimetry, and the adhesive content range from 200 to 2800 ppm in post-consumer PET bottles, depending on the drink filled. Through FTIR analysis, it was determined that the adhesives for bottles labelling are composed by poly(ethylene- co-vinyl acetate) (EVA). Based on these results, recycled PET with 0, 200, 700, 1500 and 3000 ppm of hot-melt EVA were processed in an internal mixer connected to a torque rheometer at 265°C for 10 min. Tensile tests indicate that 200 ppm of adhesive reduced PET tensile strength by 15%. Furthermore, when about 1500 ppm of adhesive is present, PET mechanical properties are reduced by 50%. Therefore, it is of utmost importance to warn the PET bottle production chain to reduce adhesive content used in labelling so that it should not exceed 200 ppm, if a high quality recycled PET is desirable.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.