Bone tissue engineering is gaining popularity as an alternative method for the treatment of osseous defects. A number of biodegradable polymers have been explored for tissue engineering purposes. A new family of biodegradable polymer/bioactive glass composite materials has been designed to be used in bone regeneration approaches. In this work, a hybrid scaffold of chitosan (CH) and bioactive glass nanoparticles (BGN) was prepared by the freeze‐gelation method. This method has been studied by adjusting the concentration of acetic acid; this process can influence the structure properties of the scaffold. In this work, several BGN/CH composites have been prepared by varying the proportion of BGN in the hybrid scaffold (20, 40, 60, and 80%). Brunauer–Emmett–Teller results showed the increased surface area and porosity volume of our composite with decreasing BGN proportion. BGN/CH hybrid scaffold was characterized by using physicochemical techniques. Obtained results showed a macroporous morphology of the scaffold with a pore size of about 200 μm, and a homogeneous distribution of the BGN in the CH matrix. X‐ray diffraction study confirmed the amorphous state of the BGN/CH hybrid scaffold. Interaction between CH and BGNs in the composite was confirmed. The in vitro assays showed adequate degradation properties, which is essential for the potential replacement by the new tissue. The in vitro bioactivity studies confirmed the formation of an apatite layer on the surface of the hybrid scaffold, which results in a direct bone bonding of the implant. These results indicate that BGN/CH hybrid scaffold developed is a potential candidate for bone tissue engineering.