Objective:The present study aims to investigate the influence of presence and shape of cervical lesions on biomechanical behavior of mandibular first premolar, subjected to two types of occlusal loading using three-dimensional (3D) finite element method (FEM).Materials and Methods:3D models of the mandibular premolar are created from a micro computed tomography X-ray image: model of sound mandibular premolar, model with the wedge-shaped cervical lesion (V lesion), and model with saucer-shaped cervical lesion (U lesion). By FEM, straining of the tooth tissues under functional and nonfunctional occlusal loading of 200 (N) is analyzed. For the analysis, the following software was used: CTAn program 1.10 and ANSYS Workbench (version 14.0). The results are presented in von Mises stress.Results:Values of calculated stress in all tooth structures are higher under nonfunctional occlusal loading, while the functional loading is resulted in homogeneous stress distribution. Nonfunctional load in the cervical area of sound tooth model as well as in the sub-superficial layer of the enamel resulted with a significant stress (over 50 [MPa]). The highest stress concentration on models with lesions is noticed on the apex of the V-shaped lesion, while stress in saucer U lesion is significantly lower and distributed over wider area.Conclusion:The type of the occlusal teeth loading has the biggest influence on cervical stress intensity. Geometric shape of the existing lesion is very important in the distribution of internal stress. Compared to the U-shaped lesions, V-shaped lesions show significantly higher stress concentrations under load. Exposure to stress would lead to its progression.
Aim:The aim of this study was to compare time of preparation and canal aberrations in a simulated root canals after using three different rotary systems: Endostar E5, Endostar E3 and T One File Gold.Materials and Methods:A total of 90 endodontic training blocks were used in this study and divided into three groups consisting of 30 each (n = 30). Blocks processing was performed by thirty dentists without any prior experience in rotary instrumentation techniques. In the first group blocks were prepared using Endostar E5, in second one with Endostar E3 and in third one with T One File Gold system. The preparation time was measured. The postoperative image of each block was taken by stereomicroscope and canal aberrations (ledge and instrument fracture) was recorded. Statistical analysis was done by SPSS software.Results:Instrumentation with T One File Gold system is significantly faster compared to instrumentation with Endostar E5 and Endostar E3 systems (p <0.05). There are no statistically significant differences in the type and number of procedural errors between Endostar E5, Endostar E3 and T One File Gold systems when the operators have no previous experience in rotary instrumentation techniques.Conclusion:Under the conditions of this study, the incidence of examined canal aberrations were similar for all tested systems. The preparation time was significantly shorter with single file system.
Objectives The study aimed to compare the color stability of two different light-cured composites after immersion in three liquids and the effectiveness of 16% carbamide peroxide (CP) in removing the discoloration. Material and methods Color stability of a microhybrid (Z250, 3M ESPE) and nanocomposite (Z550, 3M ESPE) was evaluated after immersion in instant coffee, tea, Coca-Cola, and deionized water as a control group (n=5). Samples were kept in liquids for four hours daily at 37°C for 30 days. Furthermore, 16% CP was applied for the following 14 days, simulating night whitening. A digital spectrophotometer was used for color measurement based on the CIEL*a*b* color coordinates. The color changes (∆E) were measured at baseline, after immersion in the beverages, and also after the teeth whitening procedure. Mixed and factorial ANOVA followed by Bonferroni’s post-hoc test were used for statistical evaluation (p≤0.05). Results Tested resin composites showed a color change over the acceptability threshold (ΔE*> 3.48) after immersion in coffee and tea. Nanocomposite reported a significant increase in discoloration in coffee after 30 days (p <0.05). The color of both materials significantly changed (p<0.05) along all three L*a*b* axes in coffee and tea to darker, yellow, and red. Whitening with 16% CP was effective in removing external discoloration in both examined composite materials. Conclusion Coffee and tea induced clinically detectable color changes in dental composites tested, with cumulative effects. Whitening represents an efficient method for the removal of surface discoloration in composite restorations.
<div class="WordSection1"><p><strong>Objective. </strong>To evaluate and compare the water sorption of three luting cements in three different solutions: distilled water and artificial saliva with different pH values (7.4 and 3.0). <strong>Materials and methods</strong>. Resin-modified glass-ionomer cement (GC Fuji Plus) and two resin cements (Multilink Automix and Variolink II) were used. A total of 45 specimens - 15 specimens (15x1 mm) for each cement were prepared according to ISO standard 4049:2009. The water sorptions of the cements were calculated by weighing the specimens before and after immersion and desiccation. <strong>Results. </strong>Nonparametric statistic methods were applied. GC Fuji Plus cement showed significantly higher values of water sorption in all three solutions of both resin cements (p<0.009) and significantly higher values of sorption in artificial saliva pH 3.0. Multilink Automix showed significantly higher values of water sorption compared with Variolink II in artificial saliva pH 7.4, and higher values of sorption in this solution compared with pH value 3.0. <strong>Con- clusion. </strong>Water sorption values are mainly influenced by the proportion of hydrophilic matrix, the type and composition of filler, and the pH value of solutions.</p></div>
<p class="Default"> </p><p class="Default"><strong><span>Objectives</span></strong><span>. The goal of this study was to determine the sealing ability of MTA, Biodentine, and Fuji IX as root-end materials after ultrasonic retrograde preparation using a dye penetration method. </span></p><p class="Default"><strong><span>Materials and Methods</span></strong><span>. Seventy permanent anterior teeth were used in this study. Root canals were prepared using rotary endodontic files, and obturated using the lateral condensation technique. The resection of the root apices was performed perpendicularly to the long axis, and 3 mm deep retrocavities were made by ultrasonic tips. The samples were randomly divided into three experimental groups (N=20) and two control groups (N=5). The root-end cavities were filled with mineral-trioxide aggregate (Rootdent MTA, TehnoDent, Russia) in Group 1, Biodentine (Septodont, Saint Maur des Fossés, France) in Group 2 and Fuji IX GP (GC Corporation, Tokyo, Japan) in Group 3. The retrocavities of the positive control group were left unfilled, while retrocavities in the negative control group were sealed using a flowable composite material. The samples were made transparent, and dye penetration was assessed under a stereomicroscope (x10). The data were analyzed with the Kruskal-Wallis test and the Mann-Whitney U-test. </span></p><p class="Default"><strong><span>Results</span></strong><span>. The Biodentine group had a lower mean leakage value than the MTA and Fuji IX groups, and the difference was statistically significant (P<0.01). No statistical difference in apical microleakage was found between the MTA and Fuji IX groups (P>0.05). </span></p><p class="Default"><strong><span>Conclusion</span></strong><span>. Within the limitations of this study, it was concluded that Biodentine provides better sealing ability as a root-end material than MTA and Fuji IX. There was no statistically significant difference between the sealing ability of MTA and Fuji IX as root-end materials.</span></p>
Background: Supernumerary teeth (ST) represent one of the most common developmental anomalies among humans. Objective: In this study, we set a goal to investigate ST prevalence in the Bosnian and Herzegovinian population along with characteristics and complications that ST can cause. Methods: This retrospective study was based on panoramic radiographs, CBCT images, and dental records. Analyzed ST characteristics were: type, morphology, location, eruption state, location in the arch, orientation, and associated clinical complications. Statistical analysis included univariate analysis and bivariate analysis using Fisher’s exact test with a confidence interval of 95% (p<0.05). Results: On a sample of 10.237 patients, ST teeth appear in 100 patients with a prevalence of 0.98%. Out of 138 analyzed ST mesiodens was the most frequent (43.47%). The most common location of the ST was maxilla (77.53%). The majority of ST were impacted (90.5%) but with no complications (71.7%). There was statistically significant relationship (p<0.001) between the type of ST and location (mesiodens and distomolars were mostly found in the maxilla). The relationship between ST type and morphology was also statistically significant (p<0.001)–mesiodens was associated with conical morphology, parapremolar with supplementary, and distomolar with tuberculate morphology. The occurrence of ST-associated retention of adjacent teeth was correlated to the type of tooth (p<0.001) Conclusion: The present study found prevalence of ST in B and H population to be low. Although associated pathology was not high early diagnosis allows optimal patient management which reduces later complications.
Background: In the academic world, the debate continues on the subject of how far a lack of vitamin D can affect the healing of various wounds. Objective: To determine if basal serum levels of vitamin D significantly influence clinical parameters linked to post-extraction wound healing after surgical removal of impacted/semi-impacted third molars. Methods: A total of 23 patients were included in this study. Clinical outcome parameters were: edema, trismus, pain, soft tissue healing, and dry socket signs. The research was divided into four stages. Results: Due to the high prevalence of hypovitaminosis D (91%), patients were classified into an insufficient (≥ 20 ng/ml) or a deficient group (<20 ng/ml). The results showed no statistically significant differences in pain, edema, trismus, or soft tissue healing between those two groups. A slight statistical interaction was observed in the clinical parameters related to edema and trismus assessment, but not statistically significant. We did not notice signs of “dry socket” on any of the patients. Conclusion: Within its limitations (low number of patients, high prevalence of vitamin D deficiency), this pilot study failed to find a significant influence of serum vitamin D concentrations in wound healing or post-surgery symptom (pain, edema, trismus) development after third molar extraction. Further clinical investigations are necessary to elaborate on this function of vitamin D more precisely.
Introduction: Composite materials may be exposed to chemicals in food and beverages in the oral cavity, which can lead to changes in surface roughness. The aim of this in vitro study was to evaluate the surface roughness of two restorative materials after exposure to coffee and green tea followed by a dental bleaching procedure. Methods: For nanofilled composite and microhybrid composite, 15 samples each were fabricated. Five specimens from each composite were stored in instant coffee and green tea for 4 h a day. After 30 days of immersion, specimens received dental at-home bleaching, using 16% carbamide peroxide (CP), for 7 h a day. The control group was stored in deionized water for 30 days. Surface roughness was determined by profilometry 24 h after polymerization, after 30 days of immersion, and after bleaching. The data were analyzed using a t-test for paired samples and mixed analysis of variance, at a 0.05 significance level. Results: Neither beverages nor CP treatment significantly altered the surface roughness of the composites. There was no difference between the tested composite materials regarding roughness. Conclusion: Surface roughness of the microhybrid and nanohybrid composites was not modified by coffee, green tea, and subsequent whitening treatment.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.