We report a compositional analysis of four coal samples collected from different mines in Pakistan and one Chinese brand. The coal samples were pelletized in the form of a disc and irradiated with a focused laser beam of fundamental (1064 nm) and second (532 nm) harmonics of Nd:YAG laser, which produced plasma on the sample surface. The plasma emissions were recorded using a broadband (200–800 nm), high-resolution spectrometer (LIBS2500plus, Ocean Optics Inc., USA), which shows that the emission spectra from 532 nm, were more intense and dense in comparison with 1064 nm spectra. The compositional analysis of coal samples was performed using the calibration-free LIBS technique, utilizing the plasma temperature and self-absorption corrected emission line intensities. The analysis yields a number of major and trace elements in coal samples, among which the concentration of carbon varies from 642 to 718 g/kg, and sulfur contents were detected as 1.1 to 7.2 g/kg. The heavy metals chromium and lead were detected in the range of 14 to153 and 210 to 252 ppm, respectively. In addition, the gross calorific value (GCV) of all the coal samples was estimated using the concentrations of carbon, hydrogen, nitrogen, oxygen, and sulfur from 26.40 to 27.18 MJ/kg, which is an important parameter to determine the coal quality and burning efficiency.

No abstract

No abstract

No abstract

No abstract

No abstract

No abstract

Laser-Induced Breakdown Spectroscopy is a promising spectroscopic technique with a vast spectrum of applications in fields concerned with identification and detection of elements. But it faces some limitations due to self-absorption, noise due to matrix effect and line broadening resulting in low emission signal. This research proposes LIBS signal enhancement by incorporation of metal nanoparticles (Cu, Mg, Au) on Al surface and compares their effect. The successful optical emissions enhancement is achieved as the emission intensities of Al-and Nalines of three coated samples are compared with those of uncoated Al. The Electron Temperature has been evaluated by Boltzmann plot and an increase in Electron Temperature has been observed with the incorporation of nanoparticles to the aluminum surface as compared to the untreated aluminum, due to more plasma emissions. The Electron Number Density of the aluminum plasma did not have much effect with the incorporation of Nanoparticles. The Local Thermal Equilibrium condition has been satisfied and checked by Mc Whirter's Criterion. The incorporation of metalnanoparticles can be declared as an effective method not only for LIBS signal enhancement but also better detection of trace elements which were not observed without the use of Nanoparticles.