The convertibility of paperboard in a press-forming process was studied using a novel type of tool set that allows forming of small substrates such as laboratory handsheets (i.e. experimental materials) to investigate the role of mold design on substrate-press-tool interaction. The tool set makes it possible to prepare rectangular trays in both sliding and fixed blank modes in a pilot-scale press-forming machine. The tests showed that the fixed-blank mode makes it possible to estimate the elongation of the substrate in the forming process by determining the maximum forming depth for rupture-free samples. A more detailed inspection with an optical microscope of grid-patterned materials revealed that elongation took place mostly on the rim area in addition to the tray wall, and that the outer dimensions of the blank remained practically unchanged. The behavior of the material in press forming process was evaluated in addition to the novel tool set in a bigger, production-scale mold, and results showed good agreement between the small tool set and the standard mold, in spite of the dimensional differences. The smaller size of the mold did not require a compromise in any aspect of the press-forming process.

Abstract:Mixed-matrix membranes based on amorphous and semi-crystalline polyimides with zirconium dioxide (ZrO 2 ) nanostars were synthesized. Amorphous poly(4,4 -oxydiphenylenepyromellitimide) and semi-crystalline polyimide prepared from 1,4-bis(4-aminophenoxy)benzene and 4,4'-oxydiphthalic anhydride were used. The effect of ZrO 2 nanostars on the structure and morphology of nanocomposite membranes was studied by wide-angle X-ray scattering, scanning electron microscopy, atomic force microscopy, and contact angle measurements. Thermal properties and stability were investigated by thermogravimetric analysis and differential scanning calorimetry. Transport properties of hybrid membranes containing 5 wt % ZrO 2 were tested for pervaporation of a mixture of butanol-water with 10 wt % H 2 O content. It was found that a significant amount of the ZrO 2 added to the semi-crystalline polyimide is encapsulated inside spherulites. Therefore, the beneficial influence of inorganic filler on the selectivity of mixed-matrix membrane with respect to water was hampered. Mixed-matrix membranes based on amorphous polymer demonstrated the best performance, because water molecules had higher access to inorganic particles.

No abstract

No abstract

This study examines the effect of pulp type on the formability and elongation of paperboard, which are of key importance when producing 3D packages. Material performance was studied with a press-forming machine using laboratory handsheets as substrates. The handsheets were prepared from bleached softwood and hardwood kraft pulps, chemithermomechanical pulp, recycled newsprint, and mixtures of birch kraft and other pulps. The effect of microfibrillated cellulose (MFC) on substrate properties and material formability was also investigated. The 3D elongation of MFC-free handsheets varied between 1.2 and 5.5%. Depending on the pulp type and sheet composition, three essential sheet properties were recognized. These properties were bulk, elastic modulus and bending stiffness, the first two of which