Fracture in the hip joint is a major and quite common health issue, particularly for the elderly. The loads exploited by the lower limbs are very acute and severe; in the femur, they can be several folds higher than the whole weight of the body. Nanotechnology and nanocomposites offer great potential in biomedical applications. The organic materials are more biocompatible. Mechanical properties like strength and hardness are challenging parameters which control the selection of a joint. HDPE in its pure form has been successfully used as a prosthetic foot (external) but failed as an implant material due to limited mechanical properties. High-density polyethylene thermoplastic polymer (HDPE) and multi-walled carbon nanotubes (MWCNT)/Nano-Alumina is selected as a potential material for a biomedical implant and its mechanical properties and biocompatibility have been discussed. HDPE/MWCNT/Alumina (Al 2 O 3) nanocomposites have not been explored yet for prosthetic implants. These nanocomposites were prepared in this investigation in different compositions. Prepared material has been physiochemically characterized to check the morphology and the structure. MWCNTs enhanced hardness and elastic modulus of the HDPE. Optimization of the material composition revealed that hybrid composite with structure (2.4% Al 2 O 3 and 0.6% MWCNT) exhibits better mechanical properties compared to other ratios with 3% MWCNTs and 5% MWCNTs. Thermal gravimetric analysis (TGA) dedicates that the percentage of crystallization has been increased to 6% after adding MWCNT to HDPE. The moisture absorption decreased to 90% with 5% MWCNT. Experimental results of Colorimetric assay (MTT) of a normal human epithelial cell line (1-BJ1) over Al 2 O 3 /MWCNT@HDPE showed <20% cytotoxic activity, proving its acceptance for medical use. HDPE/MWCNT/Al 2 O 3 nanocomposites emerged as a candidate material for artificial joints.
The augmentation of lubricant oil properties is key to protecting engines, bearings, and machine parts from damage due to friction and wear and minimizing energy lost in countering friction. The tribological and rheological properties of the lubricants are of utmost importance to prevent wear under unembellished conditions. The marginal addition of particulate and filamentous nanofillers enhances these properties, making the lubricant oil stable under severe operating conditions. This research explores the improvement in SAE 5w-30 base oil performance after the addition of multiwalled carbon nanotubes (MWCNTs) in six marginal compositions, namely, Base, 0.02, 0.04, 0.06, 0.08, and 0.10 weight percentage. The effect of the addition of MWCNTs on flash and pour points, thermal conductivity, kinematic viscosity, friction coefficients, and wear are investigated and reported. X-ray diffraction and transmission electron microscopy are used to characterize the MWCNTs. The purity, crystallinity, size, shape, and orientation of the MWCNTs are confirmed by XRD and TEM characterization. Pour points and flash points increase by adding MWCNTs but inconsistency is observed after the 0.06 wt.% composition. The thermal conductivity and kinematic viscosity increase significantly and consistently. The friction coefficient and wear scar diameter reduce to 0.06 wt.% MWCNTs and then the trend is reversed due to agglomeration and inhomogeneity. A composition of 0.06 wt.% is identified as the optimum considering all the investigated properties. This composition ensures the stability of the tribo-film and hydrodynamic lubrication.
Coatings are now frequently used on cutting tool inserts in the metal production sector due to their better wear resistance and heat barrier effect. Protective hard coatings with a thickness of a few micrometers are created on cutting tools using physical or chemical vapor deposition (PVD, CVD) to increase their application performance. Different coating materials are utilized for a wide range of cutting applications, generally in bi-or multilayer stacks, and typically belong to the material classes of nitrides, carbides, carbonitrides, borides, boronitrides, or oxides. The current study examines typical hard coatings deposited by PVD and CVD in the corresponding material classes. The present state of research is reviewed, and pioneering work on this subject as well as recent results leading to the construction of complete “synthesis–structure–property–application performance” correlations of the different coatings are examined. When compared to uncoated tools, tool coatings prevent direct contact between the workpiece and the tool substrate, altering cutting temperature and machining performance. The purpose of this paper is to examine the effect of cutting-zone temperatures on multilayer coating characteristics during the metal-cutting process. Simplified summary and comparisons of various coating types on cutting tools based on distinct deposition procedures. Furthermore, existing and prospective issues for the hard coating community are discussed.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.