Atomic layer etching (ALE) is a technique for removing thin layers of material using sequential reaction steps that are self-limiting. ALE has been studied in the laboratory for more than 25 years. Today, it is being driven by the semiconductor industry as an alternative to continuous etching and is viewed as an essential counterpart to atomic layer deposition. As we enter the era of atomic-scale dimensions, there is need to unify the ALE field through increased effectiveness of collaboration between academia and industry, and to help enable the transition from lab to fab. With this in mind, this article provides defining criteria for ALE, along with clarification of some of the terminology and assumptions of this field. To increase understanding of the process, the mechanistic understanding is described for the silicon ALE case study, including the advantages of plasma-assisted processing. A historical overview spanning more than 25 years is provided for silicon, as well as ALE studies on oxides, III–V compounds, and other materials. Together, these processes encompass a variety of implementations, all following the same ALE principles. While the focus is on directional etching, isotropic ALE is also included. As part of this review, the authors also address the role of power pulsing as a predecessor to ALE and examine the outlook of ALE in the manufacturing of advanced semiconductor devices.

Atomic layer etching (ALE) is the most advanced etching technique in production today. In this Perspective, we describe ALE in comparison to long-standing conventional etching techniques, relating it to the underlying principles behind the ancient art of etching. Once considered too slow, we show how leveraging plasma has made ALE a thousand times faster than earlier approaches. While Si is the case study ALE material, prospects are better for strongly bound materials such as C, Ta, W, and Ru. Among the ALE advantages discussed, we introduce an ALE benefit with potentially broad application-the ALE smoothing effect-in which the surface flattens. Finally, regarding its well-established counterpart of atomic layer deposition (ALD), we discuss the combination of ALE and ALD in tackling real world challenges at sub-10 nm technology nodes.

Atomic layer etching (ALE) is a multistep process used today in manufacturing for removing ultrathin layers of material. In this article, the authors report on ALE of Si, Ge, C, W, GaN, and SiO2 using a directional (anisotropic) plasma-enhanced approach. The authors analyze these systems by defining an “ALE synergy” parameter which quantifies the degree to which a process approaches the ideal ALE regime. This parameter is inspired by the ion-neutral synergy concept introduced in the 1979 paper by Coburn and Winters [J. Appl. Phys. 50, 5 (1979)]. ALE synergy is related to the energetics of underlying surface interactions and is understood in terms of energy criteria for the energy barriers involved in the reactions. Synergistic behavior is observed for all of the systems studied, with each exhibiting behavior unique to the reactant–material combination. By systematically studying atomic layer etching of a group of materials, the authors show that ALE synergy scales with the surface binding energy of the bulk material. This insight explains why some materials are more or less amenable to the directional ALE approach. They conclude that ALE is both simpler to understand than conventional plasma etch processing and is applicable to metals, semiconductors, and dielectrics.

The directional atomic layer etching (ALE) of GaN and AlGaN has been developed. The GaN ALE process consists of cyclic Cl 2 plasma chemisorption and Ar ion removal. The etch per cycle (EPC) was 0.4 nm within the self-limiting regime, which is 50 to 100 V. The root-mean-square surface roughness R RMS was 0.6 nm, which was improved from an initial roughness of 0.8 nm. For AlGaN ALE, BCl 3 was added to the chlorine step to obtain a smooth surface with R RMS of 0.3 nm and stoichiometry similar to the initial sample. The ultra smooth surface obtained by etching is promising for use in next-generation power devices.

Following Moore's Law, feature dimensions will soon reach dimensions on an atomic scale. For the most advanced structures, conventional plasma etch processes are unable to meet the requirement of atomic scale fidelity. The breakthrough that is needed can be found in atomic layer etching or ALE, where greater control can be achieved by separating out the reaction steps. In this paper, we study selective, directional ALE of silicon using plasma assisted chlorine adsorption, specifically selectivities to bulk silicon oxide as well as thin gate oxide. Possible selectivity mechanisms will be discussed.