The production of stable and mature compost often depends on the performance of microbes and their enzymatic activity. Environmental and nutritional conditions influence the characteristics of microbial communities and, therefore, the dynamics of major metabolic activities. Using three waste mixtures (textile waste mixed with either green, paper, or cardboard waste), the maturity of the compost produced was assessed by following the physico-chemical parameters and enzymatic activities provided by the microorganisms that were identified using next-generation sequencing (NGS). Among the three mixtures used, it was found that the two best mixtures showed C/N ratios of 16.30 and 16.96, total nitrogen of 1.37 and 1.39%, cellulase activities of 50.62 and 52.67 Ug−1, acid phosphatase activities of 38.81 and 68.77 Ug−1, and alkaline phosphatase activities of 51.12 and 56.86 Ug−1. In addition, several lignocellulosic species, together with those that are able to solubilize phosphate, were identified. Among those known for cellulase and acid/alkaline phosphatase activities, bacteria belonging to the Proteobacteria, Bacteroidetes, Actinobacteria, and Firmicutes phyla were shown. The presence of species belonging to the Ascomycota and Basidiomycota phyla of Fungi, which are known for their ability to produce cellulase and acid/alkaline phosphatases, was demonstrated. These findings provide a basis for the production of stable and mature compost based on textile waste.

No abstract

Composting is a promising source of mesophilic and thermophilic microorganisms directly involved in the decay of organic matter. However, there is a paucity of information related to bacterial and fungal diversity in compost and their enzymatic activities during the composting process. In this work, bacterial and fungal diversity during the mesophilic and thermophilic phases of textile waste composting was investigated as a way to explain the physical–chemical results obtained during the composting process. This was accomplished using a next-generation sequencing approach that targets either the 16S rRNA or ITS genomic regions of bacteria and fungi, respectively. It was observed that Proteobacteria, Bacteroidetes, and Actinobacteria were the dominant bacterial phyla present at the mesophilic phase but not at the thermophilic one. Composting textile waste exhibits a sustained thermophilic profile (above 55 °C) that usually precludes fungal activity. Nonetheless, the presence of fungi at the thermophilic phase was observed. Rozellomycota, Basidiomycota, and Ascomycota were the most dominant phyla during both composting phases. Such thermophilic fungi with great ability to decay organic matter could be isolated as pure cultures and used for the bioaugmentation of textile waste composting to achieve an advanced maturity level of textile waste compost.

No abstract

The present investigation is devoted, for the first time, to the potential of autochthonous inoculums through bio-augmentation tests to improve the compost quality and to decrease the composting time during composting of textile waste. For this reason, three strains were isolated from a mixture of textile waste, green waste, paper, and cardboard waste, and therefore identified as Streptomyces cellulosae, Achromobacter xylosoxidans, and Serratia liquefaciens, employed using bio-augmentation test. The organic matter decaying was assessed according to three different inoculums doses, separately and in consortium (4%, 6%, and 8%), to describe the effect of bio-augmentation process on the organic matter decaying. Indeed, these three strains and their consortium have shown a strong potential of organic matter degradation, equally the bacterial consortium showed a total organic carbon degradation of 20.3%, total Kjeldahl nitrogen of 1.52%, and a Carbon/Nitrogen ratio of 13.36. Compost maturity has been completed after only 12 weeks of treatment instead of 44 weeks using the classical treatment by composting. Ultimately, according to these results, bio-augmentation could be an emerging and promising strategy to accelerate the composting process of solid waste, especially in the case of industrial waste. Equally, it could be an effective tool to avoid the accumulation of industrial waste disposal in public landfills and/or nature while allowing their treatment.