First indigenously built tokamak ADITYA, operated over 2 decades with circular poloidal limiter has been upgraded to a tokamak named ADITYA Upgrade for the purpose having shape plasma operation with open divertor geometry. Experiment research in ADITYA-U has made significant progress, since last FEC 2016. After installation of PFC and standard tokamak diagnostics, the Phase-I plasma operations were conducted from December 2016 with graphite toroidal belt limiter. Purely Ohmic discharges in circular plasmas supported by Filament pre-ionization was obtained. The plasma parameters, Ip ~ 80-95 kA, duration ~ 80-180 ms with toroidal field (max.) ~ 1T and chord-averaged electron density ~ 2.5 x 10^19 m^-3 has been achieved. Being a medium sized tokamak, runaway electron (RE) generation, transport and mitigation experiments have always been one of the prime focus of ADITYA-U. MHD activities and density enhancement with H2 gas puffing studied. The Phase-I operation was completed in March 2017. The Phase-II operation preparation in ADITYA-U includes calibration of magnetic diagnostics followed by commissioning of major diagnostics and installation of baking system. After repeated cycles of baking the vacuum vessel up to ~ 130°C, the Phase-II operations resumed from February 2018 and are continuing to achieve plasma parameters close to the design parameters of circular limiter plasmas using real time plasma position control. Hydrogen gas breakdown was observed in more than ~2000 discharge including Phase-I and Phase-II operation without a single failure. Several experiments, including the primary RE control with lower E/P operation and secondary RE control with fuelling of Supersonic Molecular Beam Injection as well as sonic H2 gas puffing during current flat-top and Neon gas puffing for better plasma confinement are undergoing. The dismantling of ADITYA and reassembling of ADITYA-U along with experimental results of Phase-I and Phase-II operations from ADITYA-U will be discussed.

No abstract

A collisional-radiative (CR) model for low-temperature Ne plasma is developed. Various radiative and collisional processes involving the ground 2p 6 and the excited 2p 5 3s, 2p 5 3p, 2p 5 3d, 2p 5 4s and 2p 5 4p states are considered in the plasma. First, we calculate a complete set of required electron-impact excitation cross-sections of Ne, which is an important process in such low-temperature plasma. We used the relativistic distorted wave (RDW) theory and calculated electron excitation cross-sections for the transitions from the ground 2p 6 state to the excited 2p 5 3s, 2p 5 3p, 2p 5 3d, 2p 5 4s and 2p 5 4p states, as well as from the excited state 2p 5 3s to the 2p 5 3p and 2p 5 4p excited states of the Ne atom in a wide range of incident electron energies from the threshold to 500 eV. The ground and different excited states of the Ne are represented through the multiconfiguration Dirac-Fock wave functions, which are obtained using the GRASP2K code. To ascertain the reliability of the obtained wave functions, we calculated the oscillator strengths for different dipole allowed transitions, and compared them with the available experimental and theoretical results. Further, the calculated detailed RDW cross-sections are presented and compared with the available experimental and other theoretically calculated values. The cross-sections for 2p 5 3s to 2p 5 4p and 2p 5 3s (J=1 only) to 2p 5 3p are reported for the first time. The complete set of calculated electron excitation cross-sections of different transitions of Ne along with other processes are used to develop the CR model. The model has been applied to the diagnostics of low-temperature Ne plasma by coupling it to the optical emission and absorption measurements of Boffard et al (2012 J. Phys. D: Appl. Phys. 45 382001, and 2009 Plasma Sources Sci. Technol. 18 035017). The extracted values of electron density, electron temperature and the calculated 1s i level populations have been compared with the corresponding measurements available in the pressure range of 5-25 mTorr and are found to be in excellent agreement.

No abstract

No abstract

Since the 2018 IAEA-FEC conference, in addition to expanding the parameter horizons of the ADITYA-U machine, emphasis has been given to dedicated experiments on inductively driven particle injection (IPI) for disruption studies, runaway electron (RE) dynamics and mitigation, plasma rotation reversal, radiative-improved modes using Ne and Ar injection, modulation of magneto–hydrodynamic modes, edge turbulence using periodic gas puffs and electrode biasing (E-B). Plasma parameters close to the design parameters of circular plasmas with H2 and D2 as fuel have been realized, and the shaped plasma operation has also been initiated. Consistent plasma discharges having I P ∼ 100–210 kA, t ∼ 300–400 ms, n e ∼ 3–6 × 1019 m−3, core T e ∼ 300–500 eV were achieved with a maximum B T of ∼1.5 T. The enhanced plasma parameters are the outcome of repeated cycles of baking (135 °C), followed by extensive wall conditioning, which includes pulsed glow discharge cleaning in H, He and Ar–H mixture, and lithiumization. A higher confinement time has been observed in D2 compared to H2 plasmas. Furthermore, shaped plasmas are attempted for the first time in ADITYA-U. A first of its kind inductively driven particle injection for disruption mitigation studies has been developed and operated. The injection of solid particles into the plasma core leads to a fast current quench. Two pulses of electron cyclotron resonance wave at 42 GHz are launched in a single discharge: one pulse is used for pre-ionization and the second for heating. In a novel approach, a positively biased electrode is used to confine REs after discharge termination. E-B is also used for controlling the rotation of drift-tearing modes by changing the plasma rotation. Cold pulse propagation and signatures of detachment are observed during the injection of short gas puffs. A correlation between the plasma toroidal rotation and the total radiated power has been observed with neon gas injection-induced improved confinement modes.

No abstract

Because of undesirable side effects of chemical methods pulsed underwater corona discharges are emerging as a potential future advanced oxidation process (AOP) for water disinfection. In pulsed corona discharges a discharge channel is created, which contains a non-thermal plasma with a low degree of ionisation and low electron densities, but with electron energies of up to 10 eV. It has been demonstrated that electrons with this energy can dissociate water and oxygen molecules and produce various reactive radicals (*OH, H*, O*, HO2*), molecular species (H2O2, H2, O2), ultraviolet radiation and shock waves. It is supposed that the combination of all effects leads to a very efficient killing of microorganisms. To understand this in detail and to improve the efficiency of the overall system there is the need to develop suitable diagnostic methods for the quantitative determination of the various oxidants produced during the discharge. In this paper we present preliminary experimental results obtained with different chemical probes for *OH radicals, and H2O2 produced by pulsed corona discharges.