Around the world, large amounts of plastic and glass waste have been collected. This work is given as a way to reduce this material. This paper aims to investigate how fired clay bricks' physical and mechanical properties are affected by plastic/glass (P/G) powder. It is used as a replacement for clay, varying the plastic/glass content 00/20, 05/15, 10/10, 15/05, and 20/00 weight %. The ratio of soil to water remains constant 0.3. The maximum temperature is presented after three fire phases. The temperatures are 300 °C for the first, 600 °C for the second, and 900 °C for the third. Results for the physical properties showed an increase in the water absorption of clay brick specimens as the plastic content increased; in addition, efflorescence was increased with plastic powder. However, the density and firing shrinkage decrease with plastic quantity. Also, the experimental results showed a decrease in water absorption and efflorescence when the glass powder was increased. While the density is higher when glass powder is 20 %. According to the findings on mechanical properties, clay brick samples with higher plastic powder content 20 % displayed a decrease in compressive strength and flexural bending strength, i. e. the mechanical properties (compressive and flexural strengths) are increased with the increased
This study seeks to develop a sustainable construction technique based on the introduction of a specific method for improving concrete compressive strength through a proposed multi-vibration compaction method. An experimental program is performed to evaluate the effect of the proposed compaction technique on fresh silica fume concrete undergoing the initial setting. Multi-vibration intends to minimize concrete production cost because it upgrades the compressive strength of the same materials with better utilization of the vibration energy required for compaction. The collected experimental data presented assign relationships among vibration duration, vibration cycles or phases, and compressive strength upgrading of single vibrated, revibrated, and multi-vibrated specimens for analysis and discussion. This study shows that multi-vibration phases, rather than single vibration or revibration techniques, are powerful techniques for improving concrete compressive strength. The results indicated that the existence of an optimum multi-vibration mode was dominated by phase number and vibration duration and confirm the reliability vibration overall time duration recommended by ACI 309 which relates to a single vibration time limit to be considered in the case of multi vibration technique. Multi-vibration Mode 8 (subjected to three vibration phases 10, 20, and 30 sec ) has the best effect for the considered mixtures among the specific vibration modes. The maximum improvement ratio is 1.25, which is associated with the plastic mixture.
Construction materials made of renewable resources have promising potential given their low cost, availability, and environmental friendliness. Although hemp fibers are the most extensively used fiber in the eco-friendly building sector, their unavailability hinders their application in Iraq. This study aimed to overcome the absence of hemp fiber in Iraq and develop a new sustainable construction material, strawcrete, by using wheat straw and traditional lime as the base binder. A comparable method of developing hempcrete was established. The experimental program adopted novel Mixing Sequence Techniques (MSTs), which depended on changing the sequence of mixed material with fixed proportions. The orientation of the applied load and the specimen’s aspect ratio were also studied. The mixing proportion was 4:1:1 (fiber/binder/water) by volume. Results showed that the developed strawcrete had a dry unit weight ranging from 645 kg/m3 to 734 kg/m3 and a compressive strength ranging from 1.8 MPa to 3.8 MPa. The enhanced physical and strength properties varied with the MST and loading orientation. The properties of the developed hempcrete were compared with those of strawcrete.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.