No abstract

Despite plain cement concrete presenting inferior performance in tension and adverse environmental impacts, it is the most widely used construction material in the world. Consumption of fibers and recycled coarse aggregates (RCA) can add ductility and sustainability to concrete. In this research, two mix series (100%NCA, and 100%RCA) were prepared using four different dosages of GF (0%GF, 0.25%GF, 0.5%GF, and 0.75%GF by volume fraction).  Mechanical properties namely compressive strength, splitting tensile strength, and flexural strength of each concrete mixture was evaluated at the age of 28 days. The results of testing indicated that the addition of GF was very useful in enhancing the split tensile and flexural strength of both RCA and NCA concrete. Compressive strength was not highly sensitive to the addition of GF. The loss in strength that occurred due to the incorporation of RCA was reduced to a large extent upon the inclusion of GF. GF caused significant improvements in the split tensile and flexural strength of RCA concrete. Optimum dosage of GF was determined to be 0.25% for NCA, and 0.5% for RCA concrete respectively, based on the results of combined mechanical performance (MP).

Despite presenting a very high global warming toll, Portland cement concrete is the most widely used construction material in the world. The eco-efficiency, economy, and the overall mechanical and durability performances of concrete can be improved by incorporating supplementary cementitious materials (SCMs) as partial substitutions to ordinary Portland cement (OPC). Naturally found bentonite possesses pozzolanic properties and has very low carbon footprint compared to OPC. By applying activation techniques, the reactivity of bentonite can be improved, and its incorporation levels can be maximized. In this study, the influence of mechanical and thermo-mechanical activation of bentonite is investigated on properties of concrete. Bentonite was used for 0%, 10%, 15%, 20%, 25%, 30%, and 35% mass replacements of OPC. Mechanical (compressive strength and split tensile strength) and durability (water absorption, sorptivity coefficient, and acid attack resistance) properties were studied. Results of experimental testing revealed that, concrete containing bentonite showed good mechanical performance, while durability was significantly improved relative to control mix. Application of thermo-mechanical activation can enhance the incorporation levels of bentonite in concrete. At 15% and 25%, bentonite produced optimum results for mechanical and thermo-mechanical activation, respectively. Bentonite inclusion is more beneficial to the durability than the mechanical strength of concrete.

This study aims to evaluate the performance of mortars containing locally available Pakistani montmorillonite (Mmt) clay mineral as partial replacement of cement in various curing environments. The local montmorillonite clay in “As is” (20°C) and “heated” (100°C, 200°C, 300°C, 400°C, 500°C, 600°C, 700°C, 800°C, 900°C & 1000°C) conditions was incorporated in mortar cubes as partial replacement of cement. Montmorillonite clay of all the temperatures was replaced by 15%, 20%, 25%, 30% and 35% of cement mass in mortar cubes. The Strength Activity Index (SAI) was calculated to determine the optimum activation temperature for the clay. Compressive strengths of the controlled mix and montmorillonite modified mortars were evaluated under the Sodium Sulfate (SS) (5% solution) and mixed (Sodium Sulfate + Sodium Chloride (SCS)) (5% +3.5% solution) curing environments to study its durability performance. Upon thermal treatment montmorillonite clay showed maximum activation at 800°C temperature. Mortar containing (800°C) calcined montmorillonite clay with 25% cement replacement exhibit competent compression results. Moreover, up on exposure to aggressive environments, montmorillonite clay mortars performed better than the control samples. The mortar cubes exposed to Sulfate environment (SS) were more damaged in compression than that exposed to mixed environment (SCS), for all replacement levels and time exposures.

No abstract