Despite their widespread application, metallic orthopaedic prosthesis failure still occurs because of lack of adequate bone-bonding and the incidence of post-surgery infections. The goal of this research was to develop multifunctional composite chitosan/Bioglass coatings loaded with gentamicin antibiotic as a suitable strategy to improve the surface properties of metallic implants. Electrophoretic deposition (EPD) was applied as a single-step technology to simultaneously deposit the biopolymer, bioactive glass particles, and the antibiotic on stainless steel substrate. The microstructure and composition of the coatings were characterized using SEM/EDX, XRD, FTIR, and TGA/DSC, respectively. The in vitro bioactivity of the coatings was demonstrated by formation of hydroxyapatite after immersion in simulated body fluid (SBF) in a short period of 2 days. High-performance liquid chromatography (HPLC) measurements indicated the release of 40% of the loaded gentamicin in phosphate buffered saline (PBS) within the first 5 days. The developed composite coating supported attachment and proliferation of MG-63 cells up to 10 days. Moreover, disc diffusion test showed improved bactericidal effect of gentamicin-loaded composite coatings against S. aureus compared to control non-gentamicin-loaded coatings.

A new analytical method for determination of coenzyme Q10 (2,3-dimethoxy-5-methyl-6-decaprenyl-1,4-benzoquinone, CoQ10) in human plasma was developed based on CE using a double tensioactive microemulsion. CoQ10 was quantitatively extracted into 1-propanol/hexane and quantified by MEEKC. The microemulsion was prepared by mixing 1.4% w/w sodium bis(2-ethylhexyl) sulfosuccinate, 4% w/w cholic acid, 1% w/w octane, 8.5% w/w butanol, 0.1% w/w PVA and 85% w/w 10 mM Tris buffer at pH 9.0. The optimized electrophoretic conditions included the use of an uncoated silica capillary of 60 cm total length and 75 mum id, an applied voltage of 20 kV, room temperature and 214 nm ultraviolet detection. Selectivity, linearity, LOD, LOQ, precision and accuracy were evaluated as the parameters of validation. Owing to its simplicity and reliability, the proposed method can be an advantageous alternative to the traditional methodology for the quantitation of CoQ10 in human plasma with good accuracy and precision.

The present work deals with the development and validation of a novel dual CD-MEKC system for the systematic flavonoid fingerprinting of Ligaria cuneifolia (R. et P.) Tiegh.-Loranthaceae-extracts. The BGE consisted of 20 mM pH 8.3 borate buffer, 50 mM SDS, a dual CD system based on the combination of 5 mM β-CD and 2% w/v S-β-CD, and 10% v/v methanol. The proposed method has been successfully applied to the comparative analysis of extracts from aerial parts and different hosts, geographical areas, and extraction procedures in order to establish the flavonoid fingerprint of L. cuneifolia. The method was validated according to international guidelines. LOD and LOQ, intra and interday precision, and linearity were determined for catechin, epicatechin, procyanidin B2, rutin, quercetin-3-O-glucoside, quercetin-3-O-xyloside, quercetin-3-O-rhamnoside, quercetin-3-O-arabinofuranoside, quercetin-3-O-arabinopyranoside, and quercetin. The CD-MEKC methodology emerges as a suitable alternative to the traditional HPLC for quality control, fingerprinting, and standardization of L. cuneifolia extracts from different sources.

Increasing bacterial resistance calls for the simultaneous delivery of multiple antibiotics.