In the past year, fifth-generation (5G) wireless technology has seen dramatic growth, spurred on by the continuing demand for faster data communications with lower latency. At the same time, many researchers argue that 5G will be inadequate in a short time, given the explosive growth of machine connectivity, such as the Internet-of-Things (IoT). This has prompted many to question what comes after 5G. The obvious answer is sixth-generation (6G), however, the substance of 6G is still very much undefined, leaving much to the imagination in terms of real-world implementation. What is clear, however, is that the next generation will likely involve the use of terahertz frequency (0.1–10 THz) electromagnetic waves. Here, we review recent research in terahertz wireless communications and technology, focusing on three broad topic classes: the terahertz channel, terahertz devices, and space-based terahertz system considerations. In all of these, we describe the nature of the research, the specific challenges involved, and current research findings. We conclude by providing a brief perspective on the path forward.
Wireless communications refer to data transmissions in unguided propagation media through the use of wireless carriers such as radio frequency (RF) and visible light (VL) waves. The rising demand for high data rates, especially, in indoor scenarios, overloads conventional RF technologies. Therefore, technologies such as millimeter waves (mmWave) and cognitive radios have been adopted as possible solutions to overcome the spectrum scarcity and capacity limitations of the conventional RF systems. In parallel, visible light communication (VLC) has been proposed as an alternative solution, where a light source is used for both illumination and data transmission. In comparison to RF links, VLC links present a very high bandwidth that allows much higher data rates. VLC exhibits also immunity to interference from electromagnetic sources, has unlicensed channels, is a very low power consumption system, and has no health hazard. VLC is appealing for a wide range of applications including reliable communications with low latency such as vehicle safety communication. Despite the major advantages of VLC technology and a variety of its applications, its use has been hampered by its cons such as its dependence on a line of sight connectivity. Recently, hybrid RF/VLC systems were proposed to take advantage of the high capacity of VLC links and better connectivity of RF links. Thus, hybrid RF/VLC systems are envisioned as a key enabler to improve the user rates and mobility on the one hand and to optimize the capacity, interference and power consumption of the overall network on the other hand. This paper seeks to provide a detailed survey of hybrid RF/VLC systems. This paper represents an overview of the current developments in the hybrid RF/VLC systems, their benefits and limitations for both newcomers and expert researchers. INDEX TERMS Radio frequency (RF), visible light communication (VLC), hybrid RF/VLC, wireless fidelity (Wi-Fi), hybrid networks, hybrid RF/VLC environments.
The Internet of Things (IoT) is increasing in size by having more devices connected to it as they are becoming low-cost to manufacture and easier to connect to the internet. New use cases are being created by the need for it and feasibility to provide it, with low-cost solutions. As a key enabler of the IoT, Long Range Wide Area Network (LoRaWAN) is gaining great attention in research and industry. It provides a desirable solution for applications that require hundreds or thousands of actively connected devices to monitor a process or an environment or to assist in controlling a certain process. Some of these IoT use cases require having the location information of the IoT devices. In some cases, localization can be the intrinsic purpose of deployment. In this regard, the received signal strength indicator (RSSI)-based localization offers a feasible and affordable solution. Since LoRaWAN has only been there for only a few years, research on utilizing LoRaWAN RSSI for localization purposes is in early stages and is scarce. In this paper, we study LoRaWAN RSSI-based localization and evaluate its accuracy, impairments, and prospects. In addition, we employ the use of software-defined radios (SDR) into our work for the purpose of path-loss characterization. The experimental results revealed the fact that a high variance of RSSI due to frequency hopping feature of LoRaWAN could severely impact the localization performance. Potential solutions are developed and presented to reduce this negative impact, hence improve the performance.
In this paper, we present a wireless system for monitoring human vital signs like breathing and heartbeat via visible light sensing (VLS). Typical techniques for tracking heathcondition require body contact and most of these techniques are intrusive in nature. Body contact might irritate the patient's skin and he/she might feel uncomfortable while sensors are touching their body. However, in this method, we can estimate the breathing and heartbeat rates without any body contact using a photo-detector. Vitals monitoring using VLS make use of the idea that reflected light signal off the human body received at the photo-detector will be affected by the chest motion during heartbeats and breathing. We implemented the system using off-the-shelf photo-detector and a signal acquisition system and obtained the results for different people and in different scenarios. We found out that the accuracy of our system compared to FDA approved equipment to measure heartbeats and breathing rate is 94%. This system can be used in various domains and applications in medical facilities and in residential homes.A provisional patent (US#62/639,524) has been obtained for this work.
The introduction of light emitting diodes (LED) in automotive exterior lighting systems provides opportunities to develop viable alternatives to conventional communication and sensing technologies. Most of the advanced driver-assist and autonomous vehicle technologies are based on Radio Detection and Ranging (RADAR) or Light Detection and Ranging (LiDAR) systems that use radio frequency or laser signals, respectively. While reliable and real-time information on vehicle speeds is critical for traffic operations management and autonomous vehicles safety, RADAR or LiDAR systems have some deficiencies especially in curved road scenarios where the incidence angle is rapidly varying. In this paper, we propose a novel speed estimation system so-called the Visible Light Detection and Ranging (ViLDAR) that builds upon sensing visible light variation of the vehicle's headlamp. We determine the accuracy of the proposed speed estimator in straight and curved road scenarios. We further present how the algorithm design parameters and the channel noise level affect the speed estimation accuracy. For wide incidence angles, the simulation results show that the ViLDAR outperforms RADAR/LiDAR systems in both straight and curved road scenarios.A provisional patent (US#62/541,913) has been obtained for this work.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.