No abstract

Hydrous manganese dioxide (HMO) nanoparticles incorporated cellulose acetate (CA) composite ultrafiltration (UF) membranes are prepared with the aim of improving the water permeation and BSA contaminant removal. The HMO nanoparticles are synthesized from manganese ion and characterized by FT-IR, XRD, and FESEM. The effect of variation of HMO on CA membranes is probed using FT-IR, EDAX, contact angle, SEM, and AFM analysis to demonstrate their chemical functionality, hydrophilicity, and morphology. CA/HMO membranes are showing the enhancement in pure water flux (PWF), water uptake, porosity, hydrophilicity, fouling resistance, BSA rejection, and flux recovery ratio (FRR). CA-1 membrane displayed higher PWF (143.6 Lm 2 h −1 ), BSA rejection (95.9%), irreversible fouling (93.3%), and FRR (93.3%).Overall results confirmed that the CA/HMO nanocomposite UF membranes overcome the bottlenecks and shows potential for water treatment applications.

No abstract

Cellulose acetate (CA) nanocomposite ultrafiltration membranes are fabricated with copper oxide (CuO) nanoparticles with the aim of improving efficient protein separation and antifouling performance. CuO nanoparticles are synthesized from cupric nitrate using a wet precipitation method and characterized by FTIR and XRD. CA/CuO nanocomposite membranes fabricated using 0.5, 1.0, and 1.5 wt% of CuO nanoparticles individually by simple phase inversion technique. The CA nanocomposite membrane with 0.5 wt% of hydrophilic CuO exhibited enhanced PWF of 118.6 Lm −2 h −1 due to the improvement in porosity and water uptake. This is in good agreement with the enhanced hydrophilicity of the CA/CuO nanocomposite membranes results observed in surface contact angle and morphological investigations. Further, 95.5% of BSA separation and 94.7% of flux recovery ratio (FRR) indicates its superior antifouling potential caused due to the presence of the hydration layer at the CA/CuO membrane surface. Among all the fabricated membranes, the CA-0.5 nanocomposite membrane with 0.5 wt% of CuO exhibited superiorly improved hydrophilicity, water permeation, BSA separation, and antifouling performance indicates its potential use in water and wastewater treatment applications.

No abstract