No abstract

A present chapter is focused on remarkable dielectric, electro-optical and micro-structural peculiarities of LC-CNTs dispersions, their correlation and mutual influence. It is mainly based on authors' original results obtained within recent years. The structure of this chapter is the following. The introductory part (section 1) gives short introduction to LC-CNTs composites and elucidates benefit of combination of LC and CNTs. It also outlines a field of questions further considered. A section 2 gives details of our samples and experimental methods. The next three sections correspondingly consider dielectric, electro-optical and structural peculiarities of LC-CNTs composites. Each of these topical sections starts with a short review and lasts with the authors' original results. The final, conclusion part (Section 6), summarizes most interesting properties of LC-CNTs suspensions, their application perspectives and mention some exciting problems for further investigations. www.intechopen.com Liquid crystal dispersions of carbon nanotubes: dielectric, electro-optical and structural peculiarities 453 power of 150 W. The concentration of CNTs, c, was varied in the range 0-2 wt %. Doping of CNTs has not influenced essentially the phase transition temperatures of LC-CNTs composites. 2.4 Cells The cells for electro-optical and dielectric measurements were made from glass substrates containing patterned ITO electrodes and aligning layers of polyimide. The polyimides AL2021 (JSR, Japan) and SE5300 (Nissan Chemicals, Japan) were used for homeotropic alignment of LC EBBA, MLC6608 and MLC6609, while the polyimide SE150 (Nissan Chemicals, Japan) was utilized for planar alignment of LC 5CB. The polyimide layers were rubbed by a fleecy cloth in order to provide a uniform planar alignment of LC in either fieldon state (EBBA, MLC6608 and MLC6609) or a zero field (5CB). The cells were assembled so that the rubbing directions of the opposite aligning layers were antiparallel. A cell gap was maintained by the glass spacers of appropriate size (16 m, if not otherwise stated). Finally, these cells were filled capillary with neat or CNTs doped liquid crystals heated to isotropic state. In some dielectric measurements the cells without alignment layers were utilized. The structure of LC-CNTs composites was monitored by observation of the filled cells placed between crossed polarizers, both by naked eye and in an optical polarizing microscope. 2.5 Electro-optical measurements The electro-optical measurements were carried out using the experimental setup described in (Koval'chuk et al., 2001a). The cell was set between two crossed polarizers so that the angle between the polarizer axes and the rubbing direction was 45°. The sinusoidal voltage 0-60 V (at frequency f=2 kHz) was applied to the cell. The voltage was stepwise increased from 0 to 60 V and then decreased back to 0; the total measuring time, i.e., time of voltage application, was about 1 min. The transmittance of the samples was calculated as =(I out /I in)*100%, where I in and ...

A B S T R A C TWe present a simple and effective approach for dispersion of carbon nanotubes (CNTs) into

A pronounced irreversible electro-optical response (memory effect) has been recently observed for nematic liquid crystal (LC) EBBA doped by multi-walled carbon nanotubes (MWCNTs) near the percolation threshold of the MWCNTs (0.02 ÷ 0.05 wt. %). It is caused by irreversible homeotropic-to-planar reorientation of LC in an electric field. This feature is explained by electro-hydrodynamically stimulated dispergation of MWCNTs in LC and by the formation of a percolation MWCNT network which acts as a spatially distributed surface stabilizing the planar state of the LC. This mechanism is confirmed by the absence of memory in the EBBA/MWCNT composites, whose original structure is fixed by a polymer. The observed effect suggests new operation modes for the memory type and bistable LC devices, as well as a method for in situ dispergation of carbon nanotubes in LC cells.

Percolation of carbon nanotubes (CNTs) in liquid crystals (LCs) opens the way for a unique class of anisotropic hybrid materials with a complex dielectric constant widely controlled by CNT concentration. Percolation in such systems is commonly described as a one-step process starting at a very low loading of CNTs. In the present study the two-step percolation was observed in the samples of thickness 250 μm obtained by pressing the suspension between two substrates. The first threshold concentration, C(n)(p(1))∼10(-4) wt.%, was sensitive to temperature and phase state of LC, while the second one, C(n)(p(2))∼10(-1) wt.%, remained practically unchanged in the temperature tests. The two-stage nature of percolation was explained on a base of mean-field theory assuming core-shell structure of CNTs.

The photoresponsive electro-optical composites based on cholesteric liquid crystal (CLC) with optically controlled chirality and a minute amount of carbon nanotubes (CNTs) are studied. In cells with homeotropic anchoring, these composites exhibit a transition from fingerprint texture to homeotropic nematic texture in the course of photoinduced unwinding of the cholesteric helix. Compared with the CLC counterpart, this transition is much delayed, because of the stabilization of cholesteric filamentary domains by CNTs. The CLC-CNT composites demonstrate dual-mode operation with optical switching between reversible and memory mode. It is found that the memory response is associated with the elastic network of filamentary cholesteric domains that stabilizes the planar CLC texture reached in an electric field. In turn, the reversible mode corresponds to the unwound cholesteric state. Potential applications of this effect are discussed.

No abstract

In the present study, the influence of diamond nanoparticles (DNPs) on dielectric properties of nematic liquid crystal (LC) E7 from Merck has been considered. It is established that the insertion of DNPs leads to an increase in the dielectric constant ε', as well as to a significant change in the electric conductivity σ of the LC. The growth of ε' with the concentration of DNPs, CDNP, is mainly caused by a contribution of the DNP permittivity to the effective permittivity of the composite. The character of the σ(CDNP) curves depends on the ionic purity of LC E7: for the samples based on pure E7, an increase of the electric conductivity with the concentration of DNPs is detected, whereas the reverse trend is observed for the samples containing impure E7. This behavior is attributed to the competitive adsorption and desorption of ions on/from the surface of DNPs and the ion transfer along the percolation network of theseparticles.