The objective of this research is to implement the design of experiment method to optimize the forming conditions of bipolar plate fabrication for PEMFC, based on a compression of polymer composite materials. The polymer composite made from epoxy resin mixed with graphite powder, with 1:3 weight ratios. The dimension of specimen is 5 cm x 5 cm in width and 5 mm thick. The flow field area is 70 mm x 70 mm with serpentine flow scheme. Each flow channel is 1x1 mm in width and depth. Three factors are studied, consisting of compression pressure, compression time and compression temperature. Surface roughness and plate flatness are the responses of the experiment. The optimal conditions were found at 1400 lb/in 2 compression pressure, 5 minute compression time at 125°C compression temperature. At this point, the surface roughness of the specimen was 1.48 μm and the average deviation of plate flatness is 0.15 mm.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.