The surface area of the titanium dental implant materials can be increased by surface treatments without altering their shape and form, thereby increasing the biologic properties of the biomaterial. A good biomaterial helps in early cell adhesion and cell signaling. In this study, the commercially pure titanium surfaces were prepared to enable machined surfaces to form a control material and to be compared with sandblasted and acid-etched surfaces, laser treated surfaces and titanium dioxide (20 nm) Nano-particle coated surfaces. The surface elements were characterized. The biocompatibility was evaluated by cell culture in vitro using L929 fibroblasts. The results suggested that the titanium dioxide Nano-particle coated surfaces had good osteoconductivity and can be used as a potential method for coating the biomaterial.

Unidirectional abrasive flow finishing process was used to finish stainless steel SS316L and titanium alloy Ti-6Al-4V materials which are widely used as implant materials. Viscoelastic polymer-based flexible abrasive media was used to finish these surfaces with different pressure and number of cycles. The obtained surface roughness and surface topography were measured using profilometer, and morphology of the surface was studied using a scanning electron microscope. Further, the wettability of the finished surface was studied by measuring the contact angle (θ) for three liquids-water, formamide, and diiodomethane using the sessile drop technique. The measured contact angles were used to ascertain the surface free energy components using Van Oss Chaudhury-Good equation. Significant difference was observed on surface roughness, contact angle, and surface energy of the machined surfaces at different finishing cycles. Also, the different tendencies of the droplet contact angle and surface energy have been observed along the direction parallel and perpendicular to the finishing direction and it gave a strong conclusion that surface roughness and surface textures play a significant role in wetting characteristics. So, this work provides an overview of the interaction between droplet and surface topography of finished SS316L and Ti-6Al-4V surfaces. Further, an empirical model has been developed using the response surface methodology (RSM) for output responses namely, average surface roughness (R a ) and material removed (MR). Interactive effects of number of cycles and pressure on average surface roughness and material removed are discussed in this paper.

Fiber-reinforced composite (FRC), prostheses offer the potential advantages of optimized esthetics, low wear of the opposing dentition and the ability to bond the prosthesis to the abutment teeth, thereby compensating for less-than-optimal abutment tooth retention and resistance form. These prostheses are composed of two types of composite materials: Fiber-composites to build the substructure and hybrid or micro fill particulate composites to create the external veneer surface. This article reviews the various types of FRCs and its mechanical properties.