With metal stripes being intrinsic components of plasmonic waveguides, plasmonics provides a “naturally” energy-efficient platform for merging broadband optical links with intelligent electronic processing, instigating a great promise for low-power and small-footprint active functional circuitry. The first active Dielectric-Loaded Surface Plasmon Polariton (DLSPP) thermo-optic (TO) switches with successful performance in single-channel 10 Gb/s data traffic environments have led the inroad towards bringing low-power active plasmonics in practical traffic applications. In this article, we introduce active plasmonics into Wavelength Division Multiplexed (WDM) switching applications, using the smallest TO DLSPP-based Mach-Zehnder interferometric switch reported so far and showing its successful performance in 4×10 Gb/s low-power and fast switching operation. The demonstration of the WDM-enabling characteristics of active plasmonic circuits with an ultra-low power × response time product represents a crucial milestone in the development of active plasmonics towards real telecom and datacom applications, where low-energy and fast TO operation with small-size circuitry is targeted.

MmWave radio, although instrumental for achieving the required 5G capacity Key Performance Indicators (KPIs), necessitates the need for a very large number of Access Points, which places an immense strain on the current network infrastructure. In this article, we try to identify the major challenges that inhibit the design of the Next Generation Fronthaul Interface in two upcoming distinctively highly dense environments: i) in Urban 5G deployments in metropolitan areas and ii) in ultra-dense Hotspot scenarios. Secondly, we propose a novel centralized and converged analog Fiber-Wireless Fronthaul architecture, specifically designed to facilitate mmWave access in the above scenarios. The proposed architecture leverages optical transceivers, optical add/drop multiplexers and optical beamforming integrated photonics towards a Digital Signal Processing analog fronthaul. The functional administration of the fronthaul infrastructure is achieved by means of a packetized Medium Transparent Dynamic Bandwidth Allocation protocol. Preliminary results show that the protocol can facilitate Gbps-enabled data transport while abiding to the 5G low-latency KPIs in various network traffic conditions.

The Parnitha mountain range lies between two Quaternary rift systems in central Greece: the Gulf of Corinth Rift and the Gulf of Evia rift. We suggest that the range was formed by footwall uplift on active normal faults striking WNW–ESE and NE–SW. We investigated the scarp appearance, geometry and slip rates of three normal faults bounding this mountain range by field mapping at 1:5000 scale. Active faults studied include the 8.5 km long Fili Fault, the 4.7 km long Maliza Fault and the 4 km long Thrakomakedones Fault. We calculated comparable mean slip rates for all mapped faults (Fili: 0.18 mm/yr, Avlon: 0.2 mm/yr, Thrakomakedones: 0.24 mm/yr); however, we suggest that the WNW–ESE structures are more active during the Late Quaternary because of abundant field evidence of recent movements along slip surfaces (fresh basal stripes and slickenlines). In addition, stress axes analysis shows a N7°E–N25°E (NNE–SSW) oriented, extensional stress field, which is compatible with the focal mechanism of the Athens 1999 earthquake. The fault-slip data from the Parnitha faults show orientations similar to other low-strain areas in central Greece, such as the Gulf of Evia Rift to the north. Our slip rate estimates may explain the low recurrence of large earthquakes in Attica as opposed to high slip rate areas in central Greece such as the neighbouring Gulf of Corinth

Surface plasmon propagating modes supported by metal/dielectric interfaces in various configurations can be used for radiation guiding similarly to conventional dielectric waveguides. Plasmonic waveguides offer two attractive features: subdiffraction mode confinement and the presence of conducting elements at the mode-field maximum. The first feature can be exploited to realize ultrahigh density of nanophotonics components, whereas the second feature enables the development of dynamic components controlling the plasmon propagation with ultralow signals, minimizing heat dissipation in switching elements. While the first feature is yet to be brought close to the domain of practical applications because of high propagation losses, the second one is already being investigated for bringing down power requirements in optical communication systems. In this review, the latest application-oriented research on radiation modulation and routing using thermo-optic dielectric-loaded plasmonic waveguide components integrated with silicon-based photonic waveguides is overviewed. Their employment under conditions of real telecommunications is addressed, highlighting challenges and perspectives.

No abstract

We demonstrate Wavelength Division Multiplexed (WDM)-enabled transmission of 480Gb/s aggregate data traffic (12x40Gb/s) as well as high-quality 1x2 thermo-optic tuning in Dielectric-Loaded Surface Plasmon Polariton Waveguides (DLSPPWs). The WDM transmission characteristics have been verified through BER measurements by exploiting the heterointegration of a 60 μm-long straight DLSPPW on a Silicon-on-Insulator waveguide platform, showing error-free performance for six out of the twelve channels. High-quality thermo-optic tuning has been achieved by utilizing Cycloaliphatic-Acrylate-Polymer as an efficient thermo-optic polymer loading employed in a dual-resonator DLSPPW switching structure, yielding a 9 nm wavelength shift and extinction ratio values higher than 10 dB at both output ports when heated to 90°C.

International audienceA comprehensive theoretical analysis of end-fire coupling between dielectric-loaded surface plasmon polariton and rib/wire silicon-on-insulator (SOI) waveguides is presented. Simulations are based on the 3-D vector finite element method. The geometrical parameters of the interface are varied in order to identify the ones leading to optimum performance, i.e., maximum coupling efficiency. Fabrication tolerances about the optimum parameter values are also assessed. In addition, the effect of a longitudinal metallic stripe gap on coupling efficiency is quantified, since such gaps have been observed in fabricated structures

No abstract