Diffusive samplers for the determination of NO(x) and NO2 based on collection on a coated carbon paper filter have been developed. NO is first oxidized to NO2 and then collected on the reactive surface. When NO2 and NOx samplers are exposed simultaneously, NO can be calculated by difference. The sampler has been derived from a Palmes design as recently modified by Bertoni et al. for the determination of BTX (benzene, toluene, xylenes). Laboratory tests were conducted in controlled atmosphere to evaluate linearity, uptake rate, face velocity effects, sample stability, influence of relative humidity, precision and accuracy. The samplers are capable of reliable measurements of the two species at common levels of a polluted atmosphere in urban settings yielding average concentration levels over 1 month and beyond. The uptake rate of NO2 was found to be 11.7 mL/min in a very good agreement (within 5%) with the value calculated from theory. The measured uptake rate for NO(x) was determined in experiments involving sampling at different concentration levels in comparison to chemiluminescence (CL) measurements. The precision of the measurements for co-located passive samplers was better than 5%. The accuracy of the data collected is within +/-20% of the actual value measured by CL. The laboratory and field results show that the NO(x) and NO2 samplers meet the data quality goal requested by the first EU Directive 1999/30/EU for these pollutants.

Diffusive sampling has been used to study the spatial distribution of SO(2), NO(2), NO(x), NH(3) and BTX (benzene, toluene and xylenes) near an oil refinery located in Falconara, Italy, over the period from March to October 2001. Three different categories of sampling sites (roadside, residential and background) were studied. In total, 56 sites were monitored. The results were evaluated on the basis of the limit values found in the European Directives. The results of the defined study indicate that the measured concentrations were substantially lower than the ambient air quality standard with the maximum concentrations being generally found much closer to emission sources. The monitoring method described here can be used to assess integrated concentration levels over long periods of time and to identify pollution "hotspots" where concentrations are likely to be consistently high. Identification of these hotspots may help to assess air quality and to implement proper action plans, especially in locations where industrial and urban pollution coexist.

No abstract

A simple, cost-effective diffusive sampler is described that is suitable for measuring parts per billion (ppb) levels of ozone and nitrogen oxides. The diffusive sampler makes use of nitrite for ozone determination whereas for nitrogen oxides and nitrogen dioxide an active carbon tissue impregnated with sodium carbonate is used. Nitrate and nitrite, the formation of which is proportional to the pollutant concentration and sampling duration, are the two species analysed, respectively. Diffusion tubes have the advantage of being a lowcost, convenient way of mapping spatial distributions and investigating long-term trends of ozone and nitrogen oxides. The method is extremely useful for assessing long-term concentrations such as the annual mean for nitrogen oxides, as required by the Daughter Directive 1999/30/EC. Field tests to validate the method have been carried out at an urban background location with co-located passive samplers and continuous measurements of O 3 and NO x . An application in ecological effects monitoring for ozone is also presented.