[1] An accurate knowledge of the ocean mean dynamic topography (MDT) is mandatory for the optimal use of altimetric data, including their assimilation into operational ocean forecasting systems. A new global 1/4°resolution MDT was computed for the 1993-1999 time period with improved data and methodology compared to the previous RIO05 MDT field. First, a large-scale MDT is obtained from the CLS01 altimetric Mean Sea Surface and a recent geoid model computed from 4.5 years of GRACE (Gravity Recovery and Climate Experiment) data. Altimetric sea level anomalies and in situ measurements are then combined to compute synthetic estimates of the MDT and the corresponding mean currents. While the RIO05 MDT was based on 10 years of in situ dynamic heights and drifting buoy velocities, the new field benefits from an enlarged data set of in situ measurements ranging from 1993 to 2008 and includes all hydrological profiles from the Argo array. Moreover, the processing of the in situ data has been updated. A new Ekman model was developed to extract the geostrophic velocity component from the drifting buoy measurements. The handling of hydrologic measurements has also been revisited. Compared to the previous RIO05 solution, the new global MDT resolves much stronger gradients in western boundary currents, with mean velocities being doubled in some places. Moreover, in comparison to several other recent MDT estimates, we find that the new CNES-CLS09 MDT is in better agreement with independent in situ observations. Citation: Rio, M. H., S. Guinehut, and G. Larnicol (2011), New CNES-CLS09 global mean dynamic topography computed from the combination of GRACE data, altimetry, and in situ measurements,

This paper describes an observation-based approach that efficiently combines the main components of the global ocean observing system using statistical methods. Accurate but sparse in situ temperature and salinity profiles (mainly from Argo for the last 10 yr) are merged with the lower accuracy but high-resolution synthetic data derived from satellite altimeter and sea surface temperature observations to provide global 3-D temperature and salinity fields at high temporal and spatial resolution. The first step of the method consists in deriving synthetic temperature fields from altimeter and sea surface temperature observations, and salinity fields from altimeter observations, through multiple/simple linear regression methods. The second step of the method consists in combining the synthetic fields with in situ temperature and salinity profiles using an optimal interpolation method. Results show the revolutionary nature of the Argo observing system. Argo observations now allow a global description of the statistical relationships that exist between surface and subsurface fields needed for step 1 of the method, and can constrain the large-scale temperature and mainly salinity fields during step 2 of the method. Compared to the use of climatological estimates, results indicate that up to 50% of the variance of the temperature fields can be reconstructed from altimeter and sea surface temperature observations and a statistical method. For salinity, only about 20 to 30% of the signal can be reconstructed from altimeter observations, making the in situ observing system essential for salinity estimates. The in situ observations (step 2 of the method) further reduce the differences between the gridded products and the observations by up to 20% for the temperature field in the mixed layer, and the main contribution is for salinity and the near surface layer with an improvement up to 30%. Compared to estimates derived using in situ observations only, the merged fields provide a better reconstruction of the high resolution temperature and salinity fields. This also holds for the large-scale and low-frequency fields thanks to a better reduction of the aliasing due to the mesoscale variability. Contribution of the merged fields is then illustrated to describe qualitatively the temperature variability patterns for the period from 1993 to 2009

From the IPCC 4th Assessment Report published in 2007, ocean thermal expansion contributed by ∼ 50% to the 3.1 mm/yr observed global mean sea level rise during the 1993-2003 decade, the remaining rate of rise being essentially explained by shrinking of land ice. Recently published results suggest that since about 2003, ocean thermal expansion change, based on the newly deployed Argo system, is showing a plateau while sea level is still rising, although at a reduced rate (∼ 2.5 mm/yr). Using space gravimetry observations from GRACE, we show that recent years sea level rise can be mostly explained by an increase of the mass of the oceans. Estimating GRACE-based ice sheet mass balance and using published estimates for glaciers melting, we further show that ocean mass increase since 2003 results by about half from an enhanced contribution of the polar ice sheets -compared to the previous decade -and half from mountain glaciers melting. Taking also into account the small GRACE-based contribution from continental waters (b 0.2 mm/yr), we find a total ocean mass contribution of ∼ 2 mm/yr over 2003-2008. Such a value represents ∼ 80% of the altimetry-based rate of sea level rise over that period. We next estimate the steric sea level (i.e., ocean thermal expansion plus salinity effects) contribution from: (1) the difference between altimetry-based sea level and ocean mass change and (2) Argo data. Inferred steric sea level rate from (1) (∼ 0.3 mm/yr over [2003][2004][2005][2006][2007][2008] agrees well with the Argo-based value also estimated here (0.37 mm/yr over [2004][2005][2006][2007][2008]. Furthermore, the sea level budget approach presented in this study allows us to constrain independent estimates of the Glacial Isostatic Adjustment (GIA) correction applied to GRACE-based ocean and ice sheet mass changes, as well as of glaciers melting. Values for the GIA correction and glacier contribution needed to close the sea level budget and explain GRACE-based mass estimates over the recent years agree well with totally independent determinations.

Abstract. A new error budget assessment of the global Mean Sea Level (MSL) determined by TOPEX/Poseidon and Jason-1 altimeter satellites between January 1993 and June 2008 is presented using last altimeter standards. We discuss all potential errors affecting the calculation of the global MSL rate. We also compare altimetry-based sea level with tide gauge measurements over the altimetric period. Applying a statistical approach, this allows us to provide a realistic error budget of the MSL rise measured by satellite altimetry. These new calculations highlight a reduction in the rate of sea level rise since 2005, by ∼2 mm/yr. This represents a 60% reduction compared to the 3.3 mm/yr sea level rise (glacial isostatic adjustment correction applied) measured between 1993 and 2005. Since November 2005, MSL is accurately measured by a single satellite, Jason-1. However the error analysis performed here indicates that the recent reduction in MSL rate is real.

No abstract