Purpose Millions of cubic meters of sediments are dredged every year in the world. About 10–20%onweight basis of this material is contaminated by organic and/or inorganic pollutants. This work presents the laboratory tests performed to study a system for the remediation and reuse of mercurycontaminated sediments. The treatment is based on a cementbased granulation step (solidification/stabilization (S/S)), followed by a thermal process under vacuum during which volatile and semi-volatile compounds are removed. The experiments focused on: (1) cement hydration reactions; (2) pollutant removal efficiencies; and (3) leaching behavior, in relation to temperature and duration of the thermal process. Mercury speciation was also investigated.\ud Materials and methods Dredged at the marine harbor of Augusta (SR, Italy), the sediments used in the experiments were highly polluted by mercury (200 mgkg−1dry weight (d.w.)). The recipe applied in the S/S step was based on the particle size distribution of the resulting granulates. An indirectly–heated batch system operated under vacuum (2.6±1.3 103 Pa) at: (1) 150°C for 16 h; (2) 200°C for 6 h; (3) 250°C for 4 h; or (4) 280°C for 4 h. X-ray diffraction spectroscopy and scanning electron microscopy were used to study cement hydration reactions. Total mercury concentration and leaching tests were carried out to assess the effects of the different treatment conditions.\ud Results and discussion The best results were obtained by treating the granulate at 250°C for 4 h. Under these conditions, mercury final concentration was 49 mgkg−1 d.w., resulting in a removal efficiency of 63% referred to the granular material before thermal treatment, and 75% referred to the sediment. The concentrations measured in the leachate were compatible with the Italian requirements for reuse, with some exceptions (pH, chlorides, nickel, copper, and COD) ascribed to the specific nature of the sediment. Mercury speciation analyses pointed out changes after both the treatment steps.\ud Conclusions The final granulates accomplish most Italian requirements for reuse, even though an improvement in the S/S step or an additional washing step would help for the exceptions mentioned above. Different reuse options in civil engineering (e.g., filling material, road material, concrete aggregates, etc.) will be evaluated also taking into consideration the mechanical properties. Further studies will be carried out to assess the long-term leaching behavior and leaching under different pH conditions
This paper presents preliminary results of laboratory tests aimed at evaluating the easibility of the remediation of marine sediments, which are polluted by mercury and petroleum hydrocarbons, dredged at the bay of Augusta (SR, Italy). The treatment is composed of two sequential steps: in the first, a cement-based granular material is produced (based on a high performance concrete approach); then, the volatile and the semi-volatile compounds in the granular material are removed by a thermal desorption step. Treated materials could be reused or put into caissons, according to their mechanical properties and environmental compatibility. The experiments were focused on evaluating the effect of the process parameter values on: (i) the evolution of cement hydration reactions, (ii) thermal desorption removal efficiencies, (iii) leaching behaviour of the treated material.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.