The objective of this study is to investigate the effect of process parameters on ColdArc welding of cold rolled steel plate using 1.2 mm diameter mild steel welding wire. A Taguchi Design of Experiments (DOE) method with grey relational analysis approach was selected for data collection and optimization. 9 experiments were conducted following the L9 (33) Taguchi Orthogonal Array Design. The best result from the experiments for tensile strength was obtained for welding parameters of 70 A (current), 17.6 V (voltage) and 800 mm/min welding speed. Based on the results, the Taguchi analysis predicted the optimised tensile strength would be obtained when the welding current, welding voltage and speed are at 70V, 17.6A and 0.6 m/min, respectively. Thus, most significant parameters for tensile properties of cold rolled steel is welding speed (37%), voltage (34 %) and current (28%). These factors are critical in determining the tensile strength, where increasing the welding speed reduces the heat input. However, decreasing the heat input by lowering the welding voltage resulted in bad weld bead formation.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.