Transformation toughening is one of the methods for improving the strength of alumina which has a hardness value of ~2000 HV. In this study, 0wt.%, 5wt.%, 15wt.%, 25wt.% and 35wt.% of Ce-partially stabilised ZrO 2 powders were dispersed homogeneously in alumina powder matrix. Pure α-Al 2 O 3 and α-Al 2 O 3 /ZrO 2 mixtures were shaped by using slip casting method and then they were sintered at 1550°C. Specimens were tested in order to determine apparent porosity and bulk density, micro-hardness, flexural strength and fracture toughness. Later, wear tests were carried out on specimens by using 60 and 120 mesh abrasive papers, 64.5N, 33.3N and 14.4N loads. By this procedure, the effects of composition, load and mesh size of abrasive paper on abrasive wear behaviour was inspected throughly. Finally, surface analyses were carried out by using SEM to determine the characteristics of worn specimens.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.