No abstract

The physicochemical properties of honey harvested from popular honey-producing areas in Tanzania were investigated. Honey from Shibe-Dodoma had the highest values of specific gravity, total acidity, free fatty acid content, diastatic number, overall acceptability, and lowest hydroxymethyl-furfural (HMF) level as compared to honey samples from other areas. There was no significant difference (p > 0.05) in terms of HMF in the other honey samples from Tanga, Morogoro, Same, Arusha, and Tabora. HMF levels in all honey samples were far below the maximum acceptable level of 40 mg/kg as recommended by the Codex Alimentarius Commission Standards before storage for 6 months. No traces of streptomycin and phenol were detected in all honey samples. It was concluded that according to the values of the studied quality parameters, the types of Tanzanian honey obtained from the popular honey producing areas may be judged to be of high quality.

Levels of cyanide in two varieties of malted millet, spent grain (Machicha) and opaque beer (Mbege) were determined. Protein content and amino acid composition of the malt, Mbege and Machicha were determined. Mbege was made in the laboratory using an improved method. The cyanide content of millet, malt, spent grain and Mbege were 40.6, 513.4, 18.9 and 8.1 ppm, respectively for the Moshi local millet variety. For Sumbawanga-2 millet variety the cyanide content was found to be 41.2, 489.2, 17.8 and 6.8 ppm for the millet, malt, spent grain and Mbege, respectively. The cyanide content increased linearly as the number of days of germination of the millet grain increased and the highest values of cyanide were attained on the third day of germination. Cyanogenic glucosides in the millet were enzymetically hydrolysed to respective cyanohydrins and volatile hydrogen cyanide due to low pH level of the Mbege which was 4. Malting of the millet increased the protein content by 5%. Lysine, the most limiting amino acid in millet, increased by 20%. It was concluded that the fermentation process of the millet malt into Mbege is efficient in reducing the levels of cyanogenic glucosides below levels considered toxic and therefore rendering the product safe.

Microbiological, physicochemical and sensory quality changes in togwa during storage at ambient tropical temperatures were monitored in unpasteurized and pasteurized samples with added sodium benzoate, potassium sorbate, propionic acid or a combination of sodium benzoate and potassium sorbate. The untreated samples were unacceptable within 48 h after production. Organic acids, volatile flavor compounds and fermentable sugars were monitored in untreated samples for up to 96 h. Ethanol, 2‐methyl‐1‐propanol, 2‐methyl‐1‐propanal, 3‐methyl‐1‐butanol, 3‐methyl‐1‐butanal, acetone, acetoin, lactic, succinic and formic acid increased significantly within 48 h. Pyroglutamic and pyruvic acid decreased and then increased, while uric acid and sugars decreased within 96 h. Sodium benzoate, potassium sorbate or their combination extended the shelf‐life of the control samples by four days. Pasteurization at 97C/10 min reduced the total mesophilic bacteria, lactic acid bacteria, yeasts and Enterobacteriaceae counts to nil and maintained the pH, titratable acidity, specific gravity, and total soluble content constant, and the products were mildly acceptable during storage for up to 60 days. Pasteurization alone was comparable to the combined effects of pasteurization and treatment with preservatives on the quality of the product. Pasteurization alone may therefore be appropriate for small‐scale production and increased commercialization.

The processing technology and characteristics of orubisi/amarwa, an opaque beer commonly consumed in Kagera region in the north-western part of Tanzania is described in detail. The protein content of orubisi increased from 2.0 to 2.7% after 120 hours of fermentation. The maximum alcohol content of orubisi as determined by specific gravity method was 2.5%. The alcohol profile of orubisi analysed by gas liquid chromatography (GLC) was found to contain ethanol and iso-butanol. The test for methanol was negative. Orubisi was characterised as product with relatively high acidity ranging from 0.35-0.89 g/100 ml and a final pH of 3.7. The levels of fermentable sugars--sucrose, maltose, glucose and fructose--were 0.5, 0.7, 1.8 and 0.6 g/100 ml after 120 hours of fermentation, respectively. High microbial counts were encountered in orubisi. The viable counts included yeasts: 2.0 x 10(7) cfu/ml, moulds 7.4 x 10(6) cfu/ml, coliforms 1.18 x 10(2) cfu/ml, lactic acid bacteria 6.5 x 10(7) cfu/ml and total aerobic count 2.95 x 10(7) cfu/ml. Based on these results, orubisi poses a serious danger to public health due to the presence of high numbers of total count and coliforms. In order to improve the safety of orubisi the pasteurisation step is recommended in the process of preparing orubisi. Hygienic handling of the final product is necessary in order to avoid contamination before consumption. The presence of trace amount of iso-butanol can lead to irritation of mucous membranes and depression of central nervous system.