Three-dimensional (3D) imaging remains an expensive and challenging task in the THz band. In this study, a frequency-modulated continuous-wave photonic radar system was presented in the 300-GHz band, instead of using electronic-based devices. The proposed system can obtain a 6-dB bandwidth of 120 GHz to achieve a range resolution of ~1.1 mm. The frequency sweep linearity of a laser source was calibrated with respect to the imaging distance and range resolution, through which a maximum detectable distance of ~800 mm was achieved with the collimated beam. To obtain the desired 3D information, the synthetic aperture radar (SAR) technique was introduced to the proposed system to achieve 3D imaging, which was not bounded by the fixed focal distance of a focus lens. It can provide a spatial resolution of ~1.5 mm within a 3D imaging range up to ~300 mm. The potential and limitations of SAR imaging schemes are discussed based on the theoretical and experimental results.

No abstract

No abstract

Terahertz (THz) imaging techniques have attracted significant attention and have developed rapidly in recent years. However, despite several advances, these techniques are still not mature, and their high cost and system complexity continue to limit their applications. In this article, the techniques for achieving a practical imaging system with a compact THz transceiver are addressed, while considering the limitations of the current technique. The aim is to provide a brief review of related topics, while also covering our recent progress, which can provide some general perspectives and contrasting approaches for realizing a practical THz imaging system. The continuous wave devices are mainly focused for their flexibility of balancing the imaging resolution and data acquisition time. The importance of transceiver integration is also discussed and illustrated by introducing a 600-GHz band micro-photonic interface for integrating a THz source and detector, with a single resonant tunneling diode as a transceiver. With regard to system issues, spatial sampling with mechanical beam-scanning is discussed as an intermediate approach for moving stage and array technology. The potential and limitations of this approach are evaluated, along with an elliptical reflector as an alternative to an f-theta lens owing to its low cost and simplicity. The combination of integrated devices, along with the mechanical beam-scanning, is also discussed for demonstrating our current concept of realizing a practical THz imaging system.

No abstract