There are many advantages to adhesively bonding stiffeners onto aircraft structures rather than using traditional mechanical fastening methods. However there is a lack of confidence of the structural integrity of adhesively bonded joints over time. Acousto-ultrasonic Lamb waves have shown great potential in structural health monitoring applications in both metallic and composite structures. This paper presents an experimental investigation of the use of acousto-ultrasonic Lamb waves for the monitoring of adhesively bonded joints in metallic structures using 3D scanning laser vibrometry. Two stiffened panels were manufactured, one with an intentional disbonded region. Lamb wave interaction with the healthy and disbonded stiffeners was investigated at three excitation frequencies. A windowed root-mean-squared technique was applied to quantify where Lamb wave energy was reflected, attenuated and transmitted across the structure enabling the size and shape of the defect to be visualised which was verified by traditional ultrasonic inspection techniques.
This paper presents a novel numerical technique that combines predictions of impact-induced damage and subsequent ultrasonic guided-wave propagation in composite laminates, with emphasis on the development and verification of the modelling framework. Delamination and matrix cracking are considered in the modelling technique, which is validated by experimental measurements on a carbon-fibre/epoxy plate using a drop-weight impact tower and a scanning laser vibrometer. Good agreement has been found between simulations and experiments regarding the impact response and globallocal wavefields. Effects of these two damage modes, damage extent and multiple impacts on guided waves are studied using the modelling tool. Matrix cracking leads to lower wavefield scattering compared with delamination, particularly in un-damaged regions.The modelling strategy can provide valuable guidelines for optimising health-monitoring arrangements on composite structures that are susceptible to impacts, and the guidedwave model can also be integrated with other numerical models for predicting internal flaws in composite laminates.
As worldwide wind energy generation capacity grows, there is an increasing demand to ensure structural integrity of the turbine blades to maintain efficient and safe energy generation. Currently, traditional non-destructive testing methods and visual inspections are employed which require the turbine to be out-of-operation during the inspection periods, resulting in costly and lengthy downtime. This study experimentally investigates the potential for using Lamb waves to monitor the structural integrity of a composite wind turbine blade that has been subject to an impact representative of damage which occurs in service. 3D scanning laser vibrometry was used to measure Lamb waves excited at three different frequencies both prior to, and after, impact to identify settings for an optimal system. Signal processing techniques were applied to the datasets to successfully locate the damage and highlight regions on the structure where the Lamb wave was significantly influenced by the presence of the impact damage. Damage size resulting from the impact was found to correlate well with the laser vibrometry results. The study concluded that acousto-ultrasonic-based structural health monitoring systems have great potential for monitoring the structural integrity of wind turbine blades.
Aircraft structural damage detection is becoming of increased importance. Technologies such as acousto-ultrasonic have been suggested for this application; however, an optimization strategy for sensor network design is required to ensure a high detection probability while minimizing sensor network mass. A methodology for optimizing acousto-ultrasonic transducer placement for adhesive disbond detection on metallic aerospace structures is presented. Experimental data sets were acquired using three-dimensional scanning laser vibrometry enabling in-plane and out-of-plane Lamb wave components to be considered. This approach employs a novel multi-sensor site strategy which is difficult to achieve with physical transducers. Different excitation frequencies and source-damage-sensor paths were considered. A fitness assessment criterion which compared baseline and damaged data sets using cross-correlation coefficients was developed empirically. Efficient sensor network optimization was achieved using a bespoke genetic algorithm for different network sizes with the effectiveness assessed and discussed. A comparable numerical data set was also produced using the local interaction simulation approach and optimized using the same methodology. Comparable results with those of the experimental data set indicated a good agreement. As such, the numerical approach demonstrates that acoustoultrasonic sensor networks can be optimized using simulation (with some further refinement) during an aircraft design phase, being a useful tool to sensor network designers.
Shearography, as a novel non-destructive evaluation technique, has shown notable ability in the detection of composite materials. However, in current shearography practices, the phase shifting and loading methods applied are mainly static. For instance, vacuum hood or force loading facilities are often used in phase-shifting shearography, and these are hard to realise with robotic control, especially for on-board inspection. In this study, a dynamic process for detecting defects in the subsurface of a wind turbine blade (WTB) using spatial phase shift with dynamic thermal loading was proposed. The WTB sample underwent a dynamic thermal loading operation, and its status is captured by a Michelson interferometric-based spatial phase shift digital shearography system using a pixelated micro-polarisation array sensor. The captured images were analysed in a 2D frequency domain and low-pass filtered for phase map acquisition. The initial phase maps underwent a window Fourier filtering process and were integrated to produce a video sequence for realisation of visualising the first derivative of the displacement in the process of thermal loading. The approach was tested in experimental settings and the results obtained were presented and discussed. A comparative assessment of the approach with shearography fringe pattern analysis and temporal phase shift technique is also presented and discussed.
Hard ballistic body armour plates are designed to withstand the impact of a bullet and protect the wearer, if this happens the armour is clearly damaged and so is retired from service. Mishandling, however, such as dropping the armour, may cause minor and difficult to detect damage which compromises the effectiveness of the plate. Current methods of inspection involve shipping the plates to a central location, performing a thorough inspection and returning them to service if uncompromised; this is costly and requires redundancy of equipment for when not in service. Acousto-Ultrasonics is a method of structural health monitoring in which ultrasonic waves are excited in a structure by a transducer and receivers record the response, any deviation from a baseline measurement give an indication of damage within the structure. Within this paper the development and testing of a novel handheld prototype device is presented, which gives a simple yes/no answer to if there is damage on the plate. This inspection is quick and easy to perform by unskilled personnel. Low profile sensors have been utilised combined with a novel flexible circuitry with built in memory, which does not compromise the effectiveness of the armour.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.