Preventing or minimizing ice formation in supercooled water is of prominent importance in many infrastructures, transportation, and cooling systems. The overall phase change heat transfer on icephobic surfaces, in general, is intentionally sacrificed to suppress the nucleation of water and ice. However, in a condensation frosting process, inhibiting freezing without compromising the water condensation has been an unsolved challenge. Here we show that this conflict between anti-icing and efficient condensation cooling can be resolved by utilizing biphilic topography with patterned high-contrast wettability. By creating a varying interfacial thermal barrier underneath the supercooled condensate, the biphilic structures tune the nucleation rates of water and ice in the sequential condensation-to-freezing process. Our experimental and theoretical investigation of condensate freezing dynamics further unravels the correlation between the onset of droplet freezing and its characteristic radius, offering a new insight for controlling the multiphase transitions among vapor, water, and ice in supercooled conditions.

Hypoxia in solid tumors may be a hindrance to effective treatments of tumors in achieving their therapeutic potential, especially for photodynamic therapy (PDT) which requires oxygen as the supplement substrate. Oxygen delivery using perfluorocarbon emulsions or lipid oxygen microbubbles has been developed as the agents to supply endogenous oxygen to fuel singlet oxygen generation in PDT. However, such methods suffer from premature oxygen release and storage issues. To address these limitations, we designed lipid-polymer bilaminar oxygen nanobubbles with chlorin e6 (Ce6) conjugated to the polymer shell as a novel oxygen self-supplement agent for PDT. The resultant nanobubbles possessed excellent stability to reduce the risk of premature oxygen release and were stored as freeze-dried powders to avoid shelf storage issues. In vitro and in vivo experimental results demonstrated that the nanobubbles exhibited much higher cellular uptake rates and tumor targeting efficiency compared to free Ce6. Using the oxygen nanobubbles for PDT, a significant enhancement of therapeutic efficacy and survival rates was achieved on a C6 glioma-bearing mice model with no noticeable side effects, owing to the greatly enhanced singlet oxygen generation powered by oxygen encapsulated nanobubbles.

Novel soybean meal-based biomimetic (STP) adhesives were fabricated via soybean meal (SM) and enhanced by tannic acid (TA) and polyetheylenimine (PEI) (TAPI) co-crosslinking network based on natural polyphenol-inspired chemistry. The multiple physico-chemical interactions (including intermolecular H-bonding and covalent bonding) between the TAPI co-crosslinking system and SM matrices were examined by the Fourier transform infrared spectroscopy, solid-state 13C nuclear magnetic resonance, X-ray diffraction, thermogravimetric analysis, and scanning electron microscopy. The results showed that a dense, robust, and water-resistant adhesive layer was constructed between network-bound catechol moieties in the TAPI and SM system, endowing the STP adhesive with high wet bonding strength for plywood. As expected, TAPI-modified SM adhesives showed a 156.1% increase in wet bonding strength compared to the control SM adhesive. The adhesion meets standard requirements for interior-use plywood. Both the solid content and residual mass analysis also confirmed that the enhancement in the STP adhesive was attributable to the network crosslinking density and stiffness after integrating the TAPI system. Moreover, the thermal stability of the resultant STP adhesive exhibited a significant improvement. The proposed STP adhesive may be a promising cost-effective and wet-resistant bio-adhesive for the application in the wood composites industry.

Microbubbles have been widely used as ultrasound contrast agents in clinical diagnosis and hold great potential for ultrasound-mediated therapy. However, polydispersed population and short half-life time (<10 min) of the microbubbles still limit their applications in imaging and therapy. To tackle these problems, we develop a microfluidic flow-focusing approach to produce monodisperse microbubbles stabilized by Poly(lactic-co-glycolic acid) (PLGA) as the polymer shell. The size of PLGA microbubbles can be tightly controlled from ∼600 nm to ∼7 μm with a coefficient of variation less than 4% in size distribution for ensuring highly homogeneous echogenic behavior of PLGA polymer microbubbles in ultrasound fields. Both in vitro and in vivo experiments showed that the monodisperse PLGA microbubbles had excellent echogenicity and elongated sonographic duration time (>3 times) for ultrasound imaging in comparison with the commercial lipid microbubbles.

Tumor hypoxia is a significant factor leading to the resistance of tumors to treatment, especially for photodynamic therapy and radiotherapy where oxygen is needed to kill cancer cells. Oxygen delivery agents such as oxygen-saturated perfluorocarbon nanoemulsions and lipid oxygen microbubbles have been employed to supply oxygen to hypoxic tumors with ultrasound activation. Such oxygen delivery systems are still associated with several drawbacks, including premature oxygen release and the dependence of external stimuli. To address these limitations, we developed oxygen nanobubbles that were enclosed by the acetalated dextran polymer shells for spontaneous oxygeneration in response to a minor pH drop in the tumor microenvironment. The acetalated dextran polymer shell serves as a robust barrier against gas dissolution in the circulating blood to retain the majority of the oxygen payload, and its pH-responsive property enables an abrupt burst release of oxygen in the mild acidic tumor microenvironment. The acetalated dextran oxygen nanobubbles exhibited excellent stability and biocompatibility. In vitro and in vivo experiments were conducted to investigate the pH-responsive oxygen release. The external stimuli-free supply of oxygen by the acetalated dextran oxygen nanobubbles was evaluated on CNE2 tumor-bearing mice, and the intratumoral oxygen level increased by 6-fold after the administration of the oxygen nanobubbles, manifesting that our pH-responsive oxygen nanobubbles hold great potential as a potent oxygen delivery agent to overcome the hypoxia-induced resistance.

Droplet microfluidics, which involves micrometer-sized emulsion droplets on a microfabricated platform, has been demonstrated as a unique system for many biological and chemical applications. Robust and scalable generation of monodisperse droplets at high throughput is of fundamental importance for droplet microfluidics. Classic designs for droplet generation employ shear fluid dynamics to induce the breakup of droplets in a two-phase flow and the droplet size is sensitive to flow rate fluctuations, often resulting in polydispersity. In this paper, we show spontaneous emulsification by a high aspect ratio (>3.5) rectangular nozzle structure. Due to the confinement and abrupt change of the structure, a Laplace pressure difference is generated between the dispersed and continuous phases, and causes the thread thinning and droplet pinch-off without the need to precisely control external flow conditions. A high-throughput droplet generator was developed by parallelization of a massive number of the basic structures. This device enabled facile and rapid partition of aqueous samples into millions of uniform picolitre droplets in oil. Using this device, on-chip droplet-based digital polymerase chain reaction (PCR) was performed for absolute quantification of rare genes with a wide dynamic range.

Liquid perfluorocarbon (PFC) nanodroplets may have a better chance to extravasate through inter-endothelial gaps (400-800 nm) into tumor interstitium for extravascular imaging, which holds promise as an innovative strategy for imaging-guided drug delivery, early diagnosis of cancer and minimally invasive treatment of cancer. Currently available emulsion technologies still face challenges in reducing droplet sizes from the microscale to the nanoscale. To control size and ensure monodispersity of PFC nanodroplets, we developed a flame-shaped glass capillary and polydimethylsiloxane (PDMS) hybrid device that creates a concentric flow of the dispersed phase enclosed by the focusing continuous phase at the cross-junction. Through adjustment of the pressure applied, a stable tip-streaming mode can be obtained for PFC nanodroplet generation. Using this device, we synthesized various kinds of PFC nanodroplets as small as 200 nm in diameter with polydispersity index (PDI) <0.04. Dynamic light scattering (DLS) and transmission electron microscopy (TEM) were carried out for the characterization of the PFC nanodroplets. Finally, ultrasound imaging was conducted to demonstrate that the liquid PFC nanodroplets can be used for enhancing the ultrasound contrast upon vaporization.

This study was to develop novel soy protein isolate-based films for packaging using halloysite nanotubes (HNTs), poly-vinyl alcohol (PVA), and 1,2,3-propanetriol-diglycidyl-ether (PTGE). The structural, crystallinity, opacity, micromorphology, and thermal stability of the resultant SPI/HNTs/PVA/PTGE film were analyzed by the Attenuated total reflectance-Fourier transformed infrared (ATR-FTIR) spectroscopy, X-ray diffraction (XRD), UV-Vis spectrophotometry, scanning electron microscopy (SEM), and thermo-gravimetric analysis (TGA). The SPI/HNTs/PVA/PTGE film illustrated that HNTs were uniformly dispersed in the SPI matrix and the thermal stability of the film was enhanced. Furthermore, the tensile strength (TS) of the SPI/HNTs/PVA/PTGE film was increased by 329.3% and the elongation at the break (EB) remained unchanged. The water absorption (WA) and the moisture content (MC) were decreased by 5.1% and 10.4%, respectively, compared to the unmodified film. The results highlighted the synergistic effects of SPI, HNTs, PVA, and PTGE on the mechanical properties, water resistance, and thermal stability of SPI films, which showed excellent strength and flexibility. In short, SPI films prepared from HNTs, PVA, and PTGE showed considerable potential as packaging materials.