Damage to prehistoric cave drawings, like other cultural objects, is inevitable. This claim was widely accepted among researchers and observers of prehistoric culture in Indonesia. Even more so for images in karst caves with a medium for painting in the form of limestone surfaces that have dynamic properties. The life cycle of this rock type is influenced by natural processes, mainly by water factors such as dissolution and sedimentation. In addition, the sun, temperature fluctuations, and wind also accelerate the weathering rate, which causes many changes in the structure of the rock both thoroughly and massively, and partially. The belief in damage to prehistoric cave drawings in the Maros-Pangkep Karst Area has long been echoed by researchers and conservationists, but very few of these circles can prove how the damage process occurred, even to prove how fast the damage is. However, the development of image conditions can be measured by a simpler method to determine the speed of damage. This article offers a method that can be applied to cases of prehistoric cave image damage so that changes can be identified, in particular the volume of damage.
Rock art comprises various forms of images and markings, including paintings, drawings, and engravings, created by prehistoric people on immobile surfaces of rocks. In Indonesia, the distribution of rock art sites has been relatively well studied and documented. Indeed, Uranium-series analysis of speleothem materials overlying negative hand stencils and naturalistic animal paintings from the limestone karsts of Maros in southern Sulawesi shows that the rock art in this region dates to at least 40,000 years ago, and is thus among the world's oldest. To our knowledge, the chemistry of the Sulawesi rock art, including that of the pigments used for making these images, and with particular regard to the topology and morphology of these materials, have not yet been systematically investigated. In this study, we report the results of our spectroscopic and microscopic analyses of two samples of pigment collected from rock art motifs at Leang Sumpang Bita 2 in Pangkep, South Sulawesi.The first and second samples possess dark red and purple colours, respectively. Analysis shows that both samples contain iron oxide, which may explain their reddish colours.Nevertheless, microstructural differences are evident, including crystal morphology and size, and, in our view, are responsible for the discrepancy in the observed pigment colours. Our findings suggest that the sampled dark red and purple pigments are from the same raw material source (ochre), but differ in color because of mechanically-induced alteration, presumably the result of varying pigment-processing methods used by the prehistoric artists.
Peningkatan produksi suatu industri selalu diikuti oleh peningkatan produksi limbah yang dihasilkan. Industri batik skala rumah tangga umumnya juga belum memiliki instalasi pengolahan limbah cair sehingga limbah langsung dibuang ke lingkungan atau badan air. Hal ini memberikan dampak yang buruk terhadap lingkungan. Penelitian ini bertujuan membuat suatu teknologi pengolahan limbah cair menggunakan metode elektrokoagulasi yang diintegrasikan dengan sistem filter dan menguji efisiensinya terhadap kenaikan kadar keasaman limbah dan penurunan jumlah padatan terlarut (TDS) dari limbah tersebut. Sampel yang digunakan merupakan limbah batik dari salah satu industri batik di kota Jambi sejumlah 20 liter. Elektroda yang digunakan terbuat dari aluminium sebagai anoda dan besi sebagai katoda. Jumlah katoda dan anoda masing-masingnya adalah 4 buah dengan ukuran 60cm x 30cm x 3cm. Tegangan yang digunakan adalah 40 Volt dengan memvariasikan jarak antar elektroda dan waktu pengolahan limbah. Sebelum limbah diolah menggunakan reaktor dilakukan penyaringan dan analisis karakter awal terlebih dahulu. Hasil penelitian menunjukkan efisiensi reaktor elektrokoagulasi dalam menaikkan pH mencapai 60% hingga 123% dengan rata-rata kenaikan pH 80,83%. Pada perlakuan yang sama, metode elektrokoagulasi memiliki efisiensi dalam menurunkan konsentrasi TDS hingga 50,56 %. Hal ini menunjukkan bahwa metode ini cukup efektif dalam proses pengolahan limbah cair hingga sesuai baku mutu limbah cair.
Informasi ketinggian suatu tempat di permukaan bumi (elevasi) merupakan hal yang sangat penting di dalamanalisis geospasial. Data elevasi tersebut umumnya disimpan dalam bentuk Digital Elevation Model (DEM).DEM selanjutnya diintegrasikan dengan data geospasial lainnya di dalam GIS untuk berbagai keperluan.Lembaga formal seperti USGS, NASA, METI secara aktif melakukan pengambilan data DEM melaluiteknologi satelit dan menyediakan data DEM secara global dan dapat diperoleh secara online. Namundemikian, umumnya DEM yang tersedia secara gratis adalah DEM dengan ketelitian piksel 30 m atau lebihbesar. Khusus untuk wilayah Indonesia, ketersediaan data DEM dengan resolusi yang lebih tinggi masihsangat minimal. Padahal data DEM resolusi tinggi dibutuhkan untuk berbagai macam aplikasi misalnyasebagai data input dalam pemodelan debris flow. Pembuatan DEM dengan resolusi yang lebih tinggi dapatdilakukan melalui interpolasi titik ketinggian. Data digital berupa ketinggian yang didapat dari DEM SRTM30 m dalam bentuk format raster diekstrak di ArcMap kemudian diubah menjadi data format point sebagaiinput untuk proses interpolasi. Pada penelitian ini, akan dilakukan pembuatan DEM resolusi 5 mmenggunakan metode interpolasi Inverse Distance Weighted (IDW). Penelitian ini dilakukan pada daerahyang rawan longsor di Jawa Barat. Akurasi hasil interpolasi dilakukan dengan membandingan DEMsebelum interpolasi baik secara kualitatif dan kuantitatif. Tingkat akurasi hasil interpolasi data DEM secarakuantitatif dinyatakan dalam RMSE (Root Mean Square Error).
Kawasan seberang Kota Jambi terdapat banyak sentra batik yang terus memproduksi batik khas Jambi. Semua kegiatan produksi masih dilakukan secara manual dengan menggunakan peralatan yang sangat tradisional. Permintaan batik memang banyak, namun proses produksi yang membutuhkan banyak waktu dan butuh tenaga ahli, membatasi jumlah permintaan yang dapat mereka penuhi. Oleh sebab itu tim melakukan penelitian untuk membuat Teknologi Tepat Guna canting batik elektrik guna meningkatkan produktivitas pembatik. Canting Elektrik ini terbuat dari bahan konduktor dan isolator yang digunakan untuk membubuhkan malam pada bahan kain batik. Konsep fisik utama yang diterapkan adalah proses transfer kalor. Alatnya sangat mudah digunakan dan portable. Alat ini telah diujicobakan pada pembatik dan pembatik merasa senang menggunakannya. Penerapan teknologi canting batik elektrik ini di prediksi mampu meningkatkan produktivitas yang selanjutnya dapat meningkatkan kesejahteraan masyarakat pengrajin batik Jambi.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.