As an important component of wearable and stretchable strain sensors, dual-mode strain sensors can respond to deformation via optical/electrical dual-signal changes, which have important applications in human motion monitoring. However, realizing a fiber-shaped dual-mode strain sensor that can work stably in real life remains a challenge. Here, we design an interactive dual-mode fiber strain sensor with both mechanochromic and mechanoelectrical functions that can be applied to a variety of different environments. The dual-mode fiber is produced by coating a transparent elastic conductive layer onto photonic fiber composed of silica particles and elastic rubber. The sensor has visualized dynamic color change, a large strain range (0−80%), and a high sensitivity (1.90). Compared to other dual-mode strain sensors based on the photonic elastomer, our sensor exhibits a significant advantage in strain range. Most importantly, it can achieve reversible and stable optical/electrical dual-signal outputs in response to strain under various environmental conditions. As a wearable portable device, the dual-mode fiber strain sensor can be used for real-time monitoring of human motion, realizing the direct interaction between users and devices, and is expected to be used in fields such as smart wearable, human−machine interactions, and health monitoring.
China is now accelerating the development of an ecological engineering for carbon sequestration in coastal mariculture environments to cope with climate change. Artificial upwelling as the ecological engineering can mix surface water with bottom water and bring rich nutrients to the euphotic zone, enhance seaweed growth in the oligotrophic sea area, and then increase coastal carbon sequestration. However, one of the major obstacles of the artificial upwelling is the high energy consumption. This study focused on the development of energy management technology for air-lift artificial upwelling by optimizing air injection rate. The fundamental principle underlying this technology is that the mode and intensity of air injection are adjusted from the feedback of information on velocity variation in tidal currents, illumination, and temperature of the surface layer. A series of equations to control air injection was derived based on seaweed growth and solar power generation. Although this finding was originally developed for the air-lift artificial upwelling, it also can be used in other areas of engineering, such as water delivery, aeration, and oxygenation. The simulations show that using a variable air injection rate can lift more nitrogen nutrients of 28.2 mol than using a fixed air injection rate of 26.6 mol, mostly with the same energy cost. Using this control algorithm, the changed temperature and dissolved oxygen profiles prove the effective upwelling in the experiments and the average weights of kelp are 33.1 g in the experimental group and 10.1 g in the control group. The ecological engineering was successfully increasing crop yield for carbon sequestration in coastal mariculture environments.
Ecological engineering by artificial upwelling for enhancing seaweed growth and consequently increasing nutrient removal from seawater has proved promising in combating intense coastal eutrophication. However, a key issue needs to be answered: how much economic and ecological benefit could this engineering bring if it were to be implemented in national aquaculture areas. This study estimated the promoting effect of nutrient concentration change induced by artificial upwelling on kelp growth using a model simulation based on the temperature, light intensity, and nutrient concentration data from three bays in Shandong Province, China— Aoshan Bay, Jiaozhou Bay, and Sanggou Bay. Our results indicate that ecological engineering by artificial upwelling can increase the average yield of kelp by 55 g per plant. Furthermore, based on the current existing kelp aquaculture area of China and the aquaculture density of 12 plants/m2, we inferred that this ecological engineering could increase the natural kelp yield by 291,956 t and the removal of nitrogen (N) and phosphorus (P) nutrients by 4875–6422 t and 730–1080 t, respectively.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.