Automated guided vehicles (AGVs) are being extensively used for intelligent transportation and distribution of materials in warehouses and autoproduction lines due to their attributes of high efficiency and low costs. Such vehicles travel along a predefined route to deliver desired tasks without the supervision of an operator. Much effort in this area has focused primarily on route optimisation and traffic management of these AGVs. However, the health management of these vehicles and their optimal mission configuration have received little attention. To assure their added value, taking a typical AGV transport system as an example, the capability to evaluate reliability issues in AGVs are investigated in this paper. Following a failure modes effects and criticality analysis (FMECA), the reliability of the AGV system is analysed via fault tree analysis (FTA) and the vehicles mission reliability is evaluated using the Petri net (PN) method. By performing the analysis, the acceptability of failure of the mission can be analysed, and hence the service capability and potential profit of the AGV system can be reviewed and the mission altered where performance is unacceptable. The PN method could easily be extended to have the capability to deal with fleet AGV mission reliability assessment.

No abstract

In order to improve the operation and maintenance (O&M) of offshore wind turbines, a new Petri net (PN)-based offshore wind turbine maintenance model is developed in this paper to simulate the O&M activities in an offshore wind farm. With the aid of the PN model developed, three new potential wind turbine maintenance strategies are studied. They are (1) carrying out periodic maintenance of the wind turbine components at different frequencies according to their specific reliability features; (2) conducting a full inspection of the entire wind turbine system following a major repair; and (3) equipping the wind turbine with a condition monitoring system (CMS) that has powerful fault detection capability. From the research results, it is found that periodic maintenance is essential, but in order to ensure that the turbine is operated economically, this maintenance needs to be carried out at an optimal frequency. Conducting a full inspection of the entire wind turbine system following a major repair enables efficient utilisation of the maintenance resources. If periodic maintenance is performed infrequently, this measure leads to less unexpected shutdowns, lower downtime, and lower maintenance costs. It has been shown that to install the wind turbine with a CMS is helpful to relieve the burden of periodic maintenance. Moreover, the higher the quality of the CMS, the more the downtime and maintenance costs can be reduced. However, the cost of the CMS needs to be considered, as a high cost may make the operation of the offshore wind turbine uneconomical.

No abstract

No abstract