Kelembaban tanah mempengaruhi pertumbuhan suatu tanaman, kelembaban tanah yang tidak sesuai dengan kebutuhan suatu tanaman akan membuat pertumbuhan tanaman tidak maksimal. Perlu dilakukan monitoring penyiraman tanaman agar kelembaban tanah terjaga pada nilai yang dibutuhkan. Penelitian ini merancang sistem kontrol kelembaban tanah pada tanaman tomat menggunakann metode PID. Perancangan sistem yang dibuat menggunakan Arduino Mega2560 sebagai pengendali utama, LCD 20x40 sebagai tampilan data output pada sistem, sensor kelembaban tanah soil moisture sensor module hygrometer, driver motor L298N dan motor dc pompa. Sistem kontrol kelembanan tanah pada tanaman tomat menggunakan metode PID yang dirancang dapat melakukan monitorinng secara otomatis dengan mengontrol kelembaban tanah pada tanaman tomat agar dapat mempertahankan nilai kelembaban tanah sesuai dengan yang diinginkan, yaitu sekitar 60%. Hasil pengujian keseluruhan sistem didapatkan hasil tuning PID yang terbaik dengan nilai kp=30, ki=100, dan kd=80. Kinerja PID sudah mendekati nilai setpoint dan terdapat sedikit error dan nilai PWM yang dihasilkan meningkat ataupun menurun dengan cepat sebanding dengan parameter kp yang diberikan. Proses tersebut menandakan kinerja sistem baik sesuai dengan nilai kelembaban tanah yang dapat terjaga pada nilai setpoint.
Indonesia is a tropical country located on the equator. The average intensity of solar radiation in Indonesia is 4.8 kWh/m2. This makes Indonesia a country with new and ren ewable energy potential, one of which is solar panel technology. The first step that must be done in the process of installing solar panels in a place is to analyze the potential of solar energy. In this study, an analysis of the potential of solar energy as a new renewable energy source has been carried out at Budi Luhur University, North Petukangan, South Jakarta. Based on the research results, the maximum photovoltaic efficiency that can be achieved is 21.45%. During the day, the efficiency of the solar panels increases along with the ncrease in the value of the voltage obtained. However, the higher the panel temperature, the lower the efficiency of the solar panel. Therefore, a cooling system is needed to anticipate this.
Kualitas jaringan Long Term Evolution (LTE) di Kota Tangerang Selatan masih kurang optimal, berdasarkan data hasil drive test nilai rata-rata RSRP dan SINR termasuk dalam kategori buruk. Hal tersebut dikarenakan jumlah site yang masih kurang, serta gedung-gedung yang menghalangi site. Perlu dilakukan perencanaan ulang untuk meningkatkan kinerja jaringan LTE di Kota Tangerang Selatan dengan melakukan perhitungan estimasi jumlah penduduk serta pengguna seluler pada tahun 2024, untuk mengetahui jumlah site yang dibutuhkan yang mencakup seluruh area di Kota Tangerang Selatan. Nilai total loss yang disebabkan oleh gedung–gedung di wilayah Kota Tangerang Selatan juga diperhitungkan, dengan menggunakan perbandingan model propagasi COST 231 dan Lee, sehingga didapatkan prediksi cakupan site serta jumlah site yang dapat mencakup keseluruhan area. Hasil yang didapatkan dari perencanaan jaringan 4G LTE di Kota Tangerang Selatan pada eNodeB berdasarkan kapasitas dari nilai parameter RSRP dan SINR termasuk dalam kategori sangat baik. Sedangkan berdasarkan coverage menggunakan model propagasi COST 231 dan Lee, didapatkan model propagasi Lee yang sesuai dengan parameter serta mencakup area lebih luas dibandingkan model propagasi COST 231. Dari keseluruhan hasil simulasi untuk nilai RSRP dan SINR sudah sesuai dengan standar KPI, yaitu nilai RSRP > -80dBm dan nilai SINR > 5dB.
Abstrak-Femtocell dinilai menjadi kunci utama dalam teknologi telekomunikasi untuk meningkatkan kapasitas sistem selular dengan cara memperkecil dimensi sel. Pada umumnya, jaringan femtocell dirancang untuk diletakkan di dalam ruangan tertutup. Peletakan femtocell dinilai menjadi isu penting untuk menyelesaikan permasalahan perancangan jaringan nirkabel oleh karena perancangan manual dinilai sangat tidak efisien. Dalam penelitian ini, dilakukan sebuah pendekatan untuk menyelesaikan permasalahan penempatan femtocell yang terletak di dalam ruangan menggunakan bat algorithm. Tujuan utama dari penelitian ini adalah untuk menentukan letak femtocell yang optimal sehingga dapat memaksimalkan nilai SNR. Dalam 100 kali percobaan, optimasi yang digunakan mampu meningkatkan rerata SNR sebesar 34,89 dB. Hal ini menunjukkan bahwa pendekatan yang dilakukan adalah sangat efektif dan efisien. Kata kunci: bat algorithm, femtocelll, optimasiAbstract-Femtocell has been considered as an important technology to increase the cellular system capacity by bringing the base station closer to the user and shrinking the cell dimension. Basically, femtocell networks are deployed in indoor environment such as an office. Thus, femtocell placement problems are one of the important issues in planning the wireless networks, since the manual planning processes are not efficient. In this paper, the solution of femtocell placement problem in an indoor environment is solved by bat algorithm. Selecting the best position of the femtocell is the main objective so the capacity can be maximized. In a 100 trial study, the SNR can be optimized up to 34.89 dB. In conclusion, the bat algorithm is able to improve the SNR efficiently and effectively.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.